Beltronics 926, Beltronics Express, 916 manual Troubleshooting, Solutions for Common Problems

troubleshooting

Solutions for Common Problems

If your express 926 or express 916 is not operating properly, please refer to the outline below.

Problem	Possible Cause	Corrective Procedure
Unit not	Plug not properly inserted	Reinsert plug and rotate
receiving power
	Fuse in power cord is	Replace with 1 amp
	defective	250 Volt 3ag fuse (see page 12)
	Lighter socket not clean	Consult your dealer or a
	and negatively grounded	professional mechanic
	Fuse or electrical wiring	Consult your dealer or a
	for lighter socket defective	professional mechanic
“Poor detection	Antenna/lens opening	Reposition unit with
range”	partially blocked	unobstructed view of
		road ahead and behind
	Radar signals unable to	Determine whether
	pass through windshield	your vehicle has a
		“heated windshield”
		known as Instaclear®
		or ElectriClear®, or
		is covered with a
		metallic sun screen
Erratic or frequent	High concentration of	Use city mode
alerts	non-police X band sources
		Review section in this
		manual on Performance
		Verification
Partial or no display	Dim or dark mode engaged	Disengage dim or
		dark mode

If you experience a problem with your unit that is not covered in this outline please call, Monday to Friday,  –  , for assistance:

--- 

