Beltronics Beltronics Express, 916 City ALL X/K/Ka-Model 926 only, Reset to Factory Settings

Page 8

Activating the City X Mode will not change Super Wideband Ka, K or instant-on X band Radar alert patterns.

Note—the cty mode does not change the presentation of alerts for Laser, swsor vg-2 signals.

City ALL (X/K/Ka)-Model 926 only

City ALL provides an alternated approach for improving X, K and Ka band selectivity and is ideal for use in areas with a high level of microwave trasmissions which can cause falsing on all three bands. To engage City X/K/Ka mode, press  until the Dispay shows a capital “A”. Once engaged, weak X, K or Super Wideband Ka signals encountered will provide no audible alerts until the signal strength reaches a preset level. Visual alerts are processed the instant an X, K or Super Wideband Ka signal is detected, keeping you quietly informed.

Reset to Factory Settings

You can reset your unit to factory settings for volume, , ,  and Selectable Features. With the unit , press and hold  button then press the  and P/V buttons simultaneously. Two “beeps” and “F” in the digital display, confirm that the unit is reset to the original factory settings. Your unit is now  and ready for operation.

selectable features

Safety Warning System®, vg-2 Guard® Alert, 60 swsDigital Voice Messages (Model E926CS only) and Digital Voice prompts for Radar/Laser/vg-2 Guard® are all features which may be selected  or , depending upon your preference. These Selectable Features are referenced by the digits #, #, #3 and #4 respectively.

Safety Warning System® (sws)—#

When on, unit will provide an swswarning when swstransmitters are detected. Factory setting is .

Image 8
Contents E916CS Introduction Selectable featuresSafety Warning System sws Table of contents Profile of features Ka for additional selectivityDescription of features Power-Up Test SequenceTutorial Mode Memory Retention of Feature SelectionsAdjusting the Audio Level  Dim/Dark Button Audio Mute Button Continuous Audio Alert PatternManual Muting of Audio Alerts Radar & sws Pressing the  button once engages the city X modeLevel, causing a full X band audio alert City ALL X/K/Ka-Model 926 only Reset to Factory SettingsSafety Warning System sws -# Digit #1 solid-swsis  Digit #1 flashing-swsis  Digit #2 flashing-vg-2 Guard is Digital Voice Prompts for Radar/Laser/sws vg-2 Guard Digit #4 solid-Digital Voice prompts Beep will sound InstallationEntering Selectable Features Mode Case of an accident For optimum detection, position your unit with a clearUnobstructed view of the road from the front and rear This will eliminate unnecessary vibration windshield Nearest the windshieldCup to secure it in place Understanding radar, laser and sws Or the spring inside the holderInterpretation of alerts Radar Alerts. Stationary Radar aimed around a corner . Moving Radar behind you, traveling in the same direction  they are most often weak, it is possible to drive outPage To select sws on or off, see Selectable Features, page   #-Emergency/Slow Moving Vehicles messagesPerformance verification Troubleshooting Solutions for Common ProblemsLimited 1-Year Warranty --- Inspection and postage return ServiceTwelve months Specifications AccessoriesHead Office