Beltronics 926, 916 Case of an accident, For optimum detection, position your unit with a clear

Page 11

.

Consider occupant safety when selecting a mounting location.

 

Choose a location where the unit will not be hazardous in

 

case of an accident.

.

For optimum detection, position your unit with a clear,

 

unobstructed view of the road from the front and rear.

.

Do not allow the unit to make contact with the windshield.

 

This will eliminate unnecessary vibration.

.

Avoid placing your unit in direct sunlight. During the summer,

 

the interior of an enclosed vehicle can sometimes reach

 

temperatures that will cause premature aging of the unit.

.

Your detector is not waterproof; exposure to water may cause

 

damage.

Dash Mounting

.

Select an area that is relatively level, clean and dry. Adhere the

 

soft portion of the enclosed hook and loop fastener to this area

 

and the corresponding hard portion to the bottom of your unit.

.

Fasten unit to dash by placing

 

 

 

hook and loop pieces together.

Mounting Brackets

The visor bracket is fully assembled. To assemble the windshield bracket, follow this diagram.

Visor Mounting

.

Remove the mounting bracket

 

cover on top of the unit by pressing on the raised dots and

 

pushing outward. Store the cover in a safe place.



Image 11
Contents E916CS Introduction Selectable featuresSafety Warning System sws Table of contents Ka for additional selectivity Profile of featuresMemory Retention of Feature Selections Description of featuresPower-Up Test Sequence Tutorial ModeContinuous Audio Alert Pattern Adjusting the Audio Level Dim/Dark Button  Audio Mute ButtonManual Muting of Audio Alerts Radar & sws Pressing the  button once engages the city X modeLevel, causing a full X band audio alert City ALL X/K/Ka-Model 926 only Reset to Factory SettingsSafety Warning System sws -# Digit #4 solid-Digital Voice prompts  Digit #1 solid-swsis  Digit #1 flashing-swsis Digit #2 flashing-vg-2 Guard is  Digital Voice Prompts for Radar/Laser/sws vg-2 GuardBeep will sound InstallationEntering Selectable Features Mode This will eliminate unnecessary vibration Case of an accidentFor optimum detection, position your unit with a clear Unobstructed view of the road from the front and rear windshield Nearest the windshieldCup to secure it in place Or the spring inside the holder Understanding radar, laser and swsRadar Alerts Interpretation of alerts. Stationary Radar aimed around a corner  they are most often weak, it is possible to drive out . Moving Radar behind you, traveling in the same directionPage  #-Emergency/Slow Moving Vehicles messages To select sws on or off, see Selectable Features, page Performance verification Solutions for Common Problems Troubleshooting---  Limited 1-Year WarrantyInspection and postage return ServiceTwelve months Accessories SpecificationsHead Office