Casio TC-540 manual Storing Autodial Numbers, 3Press Autodial

BASE

PAGE AUTODIAL 18

STORING AUTODIAL

NUMBERS

You may store up to 10 of your most frequently dialed numbers in autodial memory. Autodial station numbers can be up to 16 digits each. To store autodial numbers, the AC ADAPTER must be connected correctly. Numbers may only be stored at the base unit.

Press STORE (under the lid in the
1handset cradle).	STORE

2Enter one of the telephone numbers you want to store in the autodial memory by dialing it on the keypad. You will hear a confirmation tone after entering each digit.

3Press AUTODIAL.

AUTODIAL

OUTGOING MESSAGE STORE

RECORD CHECK

CHARGING
MEMO/CONV	PAGE	TIME
LINE IN USE
ABC	DEF	AUTODIAL

4Press a keypad number (0-9) as the autodial location for that number.

1

5Press STORE.

6Repeat steps 1-5 to store up to 10 autodial numbers.

7To exit the programming mode any time during programming, press STORE or wait 10 seconds. You will hear a double beep when the TC-540 exits the programming mode.

8Write the names and telephone numbers of the people whose numbers you have stored on the TC-540’s autodial index (located in the handset cradle.)

NOTES:

To relocate your TC-540, unplug the AC ADAPTER from the wall outlet and install the unit at a new location. If a 9 volt battery is installed, the autodial memory, message count, and time/day stamp will be saved for 1 hour during a power failure.

You can store important emergency numbers in autodial memory (police, fire, medical 911 for example) but Casio Phonemate assumes no responsibility for this feature. When programming and/or making test calls to emergency numbers, remain on the line and briefly explain to the dispatcher the reason for the call. Perform such activities in off peak hours, such as early morning or late evenings.

1 2 3