AT&T 1782 user manual Caller ID Operation, Incoming Number Announce

Page 42

CALLER ID OPERATION

This product is designed to store and display information about incoming telephone calls. For this feature to work, the unit must be used with Caller Identification service provided by your local telephone company; there is a fee for this service, and it may not be available in all areas. This product can provide information only if both you and the caller are in areas offering Caller Identification service, and if both telephone companies use compatible equipment.

When you use this product with Caller ID service, you can see who’s calling before you answer the phone.

If you subscribe to Caller ID with Call Waiting, a combined service available through many local telephone companies, you can see who’s trying to reach you even when you’re on another call. This service may be called by different names (such as Caller ID with Visual Call Waiting) by different local telephone companies and may not be available in all areas.

NOTE: You must subscribe to combined Caller ID with Call Waiting as a single service on both lines to see Call Waiting information. Check with your local telephone company for availability.

This unit assigns each incoming call a number from 1 to 99. The most recent unreviewed call will have the highest number. (For example, if two calls have been received, call number 2 is the most recent.) When the call history is full, the oldest call information is automatically deleted to make room for the new incoming call information.

Incoming Number Announce

NOTE: Speaker volume must be set to a level you can hear for this feature to be effective.

In addition to the call information displays, this system can be set to announce the telephone number and line number (1 or 2) of incoming Caller ID calls. (See “Turn Incoming Number Announce On or Off” on page 19.)

If the incoming telephone number is connected to a Talking Caller ID Announcement, the system plays the Talking Caller ID Announcement instead of the telephone number.

39

Image 42
Contents USER’S Manual Advanced American Telephones. All rights reserved Page Contents Page Buttons About SoftkeysScreen Indicators Before You Begin InstallationTable/Desk Installation Connect line cordsFor two single-line wall jacks with a single two-line phone For one two-line wall jack with two single-line phones For two single-line wall jacks with two single-line phones Wall Installation Connect the power cordInitialization Select display languageStore Home Area Code Set the clock Adjust display contrastSet Dial Mode Set the dateSET UP System Features Feature SetupSet the Time and Date Answering System Feature Setup Announcement OptionsRecord Outgoing Announcement for a Line Review Outgoing Announcement for a Line Delete Outgoing Announcement for a LineSelect Outgoing Announcement for a Line Ring Select and Toll Saver for a LineAnswer When Recording for a Line Remote Access Code for the SystemPriority Call Signal for the System Change Priority Call Code for the SystemAnnouncement Monitor for the System Audible Message Alert for the SystemTurn Incoming Number Announce On or Off Caller ID Feature SetupTurn Caller ID with Call Waiting On or Off for a Line Program Area CodesHome Area Code Guidelines Local Area Code GuidelinesHome Area Code Local Area CodesBlocked Call Information Set Display Screen LanguageCall Match Feature Setup Set Dial ModeSet Display Contrast Caller Specific Outgoing Announcements Store a Number for Caller Specific Outgoing Announcement Remove a Number for Caller Specific Outgoing Announcement Record a Caller Specific Outgoing AnnouncementReview a Caller Specific Outgoing Announcement Talking Caller ID Delete a Caller Specific Outgoing AnnouncementStore a Number for Talking Caller ID Record a Talking Caller ID Announcement Review a Talking Caller ID AnnouncementDelete a Talking Caller ID Number Answering System Operation Listen to Your Messages Delete All Messages Delete MessagesRecord a Memo Delete Selected MessagesWhen Memory is Full Record a Telephone ConversationConnect with the Answering System Play MessagesConnect with the answering system Record Announcement Delete Selected MessageEnd the Remote Access Call Change Remote Access CodeTurn System Off Turn System On Review Call HistoryVoice Help Menu Memory FullCaller ID Operation Incoming Number AnnounceNEW Call Light Caller ID OperationCall Waiting Reviewing Call HistoryRemoving Call Records from History Remove Selected Call RecordRemove All Call Records Display Dial Making a Display Dial CallDisplay Dial Options Display Messages For exampleMessages are Incomplete Case of DifficultyDisplay Screen is Blank System Does Not Answer After Correct Number of RingsSystem Hangs Up While Using Display Dial With Speakerphone System Does Not Respond to Remote CommandsPower Failure Recovery Screen Displays Extension in Use, and None AreSome of the Message is Not Audible Screen is FlashingScreen Continues to Display Lift Receiver Display Dial Doesn’t WorkTemplate For Wall Mounting Use two #4 screwsRemote Commands To connect with your answering systemRemote Commands

1782 specifications

AT&T 1782 is a significant telecommunications switch that was deployed primarily in the late 20th century, forming an integral part of the phone network infrastructure. This technology played a crucial role in the transition from analog to digital telephony, enhancing the efficiency and reliability of communication services. The AT&T 1782 switch utilized a digital processing architecture, allowing for improved call handling capabilities and a reduction in operational costs.

One of the main features of the AT&T 1782 is its ability to support a high volume of simultaneous calls. With a digital switching capacity, it could handle numerous lines and connections without the performance degradation often seen in older analog systems. This scalability made it an attractive option for many service providers looking to expand their networks while maintaining low latency calls.

In terms of technology, the AT&T 1782 was based on time division multiplexing (TDM), a technique that divides the available bandwidth of a communication medium into time slots. This method allowed multiple signals to share the same transmission medium efficiently, ensuring optimal utilization of resources. The digital nature of the switch also facilitated easier integration with emerging technologies, paving the way for more advanced telecommunication services such as data transmission and multimedia communication.

Another characteristic of the AT&T 1782 switch was its reliability. The design emphasized redundancy and fault tolerance, which minimized downtime and improved service quality. This reliability made the switch suitable for various applications, from residential telephony to larger corporate communications.

The AT&T 1782 also supported advanced features like call routing, billing services, and maintenance monitoring. Service providers could implement these functionalities easily, allowing for personalized customer services and more efficient network management.

Overall, the AT&T 1782 embodies a critical advancement in telecommunication technology, providing the backbone for many service providers during a transformative time in the industry. Its combination of high capacity, digital processing, and reliability positioned it as a preferred choice for many communications networks, influencing how calls and data were managed for years to come.