AT&T 1782 user manual Case of Difficulty, Display Screen is Blank, Messages are Incomplete

Page 47

IN CASE OF DIFFICULTY

If this answering system does not work properly, try the following suggestions. For Customer Service, visit our website at www.telephones.att.com, or call 1 800 222–3111.

Please retain your receipt as your proof of purchase.

Display Screen is Blank

Make sure the power cord is securely connected to both the answering system and an electrical outlet not controlled by a wall switch.

Messages are Incomplete

The system can accept messages up to three minutes long. If a caller leaves a very long message, part of it might be lost when the system disconnects the call after three minutes.

If the caller pauses for more than seven seconds, the system stops recording and disconnects the call.

If the system’s memory fills up during a message, the system stops recording and disconnects the call.

System Does Not Answer After Correct Number of Rings

If the Toll Saver feature is on, the number of rings changes when you have new messages waiting. See the SET UP SYSTEM FEATURES section of this manual.

In some cases, the system might be affected by the ringing system used by the local telephone company.

If the system’s memory is full or the system is off, it answers after 10 rings.

System Will Not Record Messages

When memory is full, saved messages must be deleted before new messages can be recorded.

44

Image 47
Contents USER’S Manual Advanced American Telephones. All rights reserved Page Contents Page About Softkeys ButtonsScreen Indicators Connect line cords InstallationTable/Desk Installation Before You BeginFor two single-line wall jacks with a single two-line phone For one two-line wall jack with two single-line phones For two single-line wall jacks with two single-line phones Connect the power cord Wall InstallationStore Home Area Code InitializationSelect display language Set the date Adjust display contrastSet Dial Mode Set the clockSet the Time and Date SET UP System FeaturesFeature Setup Record Outgoing Announcement for a Line Answering System Feature SetupAnnouncement Options Delete Outgoing Announcement for a Line Review Outgoing Announcement for a LineRing Select and Toll Saver for a Line Select Outgoing Announcement for a LineRemote Access Code for the System Answer When Recording for a LineChange Priority Call Code for the System Priority Call Signal for the SystemAudible Message Alert for the System Announcement Monitor for the SystemProgram Area Codes Caller ID Feature SetupTurn Caller ID with Call Waiting On or Off for a Line Turn Incoming Number Announce On or OffLocal Area Code Guidelines Home Area Code GuidelinesLocal Area Codes Home Area CodeSet Display Screen Language Blocked Call InformationSet Display Contrast Call Match Feature SetupSet Dial Mode Caller Specific Outgoing Announcements Store a Number for Caller Specific Outgoing Announcement Review a Caller Specific Outgoing Announcement Remove a Number for Caller Specific Outgoing AnnouncementRecord a Caller Specific Outgoing Announcement Store a Number for Talking Caller ID Talking Caller IDDelete a Caller Specific Outgoing Announcement Review a Talking Caller ID Announcement Record a Talking Caller ID AnnouncementDelete a Talking Caller ID Number Answering System Operation Listen to Your Messages Delete Selected Messages Delete MessagesRecord a Memo Delete All MessagesRecord a Telephone Conversation When Memory is FullConnect with the answering system Connect with the Answering SystemPlay Messages Delete Selected Message Record AnnouncementTurn System Off End the Remote Access CallChange Remote Access Code Review Call History Turn System OnMemory Full Voice Help MenuIncoming Number Announce Caller ID OperationReviewing Call History Caller ID OperationCall Waiting NEW Call LightRemove All Call Records Removing Call Records from HistoryRemove Selected Call Record Display Dial Options Display DialMaking a Display Dial Call For example Display MessagesSystem Does Not Answer After Correct Number of Rings Case of DifficultyDisplay Screen is Blank Messages are IncompleteScreen Displays Extension in Use, and None Are System Does Not Respond to Remote CommandsPower Failure Recovery System Hangs Up While Using Display Dial With SpeakerphoneDisplay Dial Doesn’t Work Screen is FlashingScreen Continues to Display Lift Receiver Some of the Message is Not AudibleUse two #4 screws Template For Wall MountingTo connect with your answering system Remote CommandsRemote Commands

1782 specifications

AT&T 1782 is a significant telecommunications switch that was deployed primarily in the late 20th century, forming an integral part of the phone network infrastructure. This technology played a crucial role in the transition from analog to digital telephony, enhancing the efficiency and reliability of communication services. The AT&T 1782 switch utilized a digital processing architecture, allowing for improved call handling capabilities and a reduction in operational costs.

One of the main features of the AT&T 1782 is its ability to support a high volume of simultaneous calls. With a digital switching capacity, it could handle numerous lines and connections without the performance degradation often seen in older analog systems. This scalability made it an attractive option for many service providers looking to expand their networks while maintaining low latency calls.

In terms of technology, the AT&T 1782 was based on time division multiplexing (TDM), a technique that divides the available bandwidth of a communication medium into time slots. This method allowed multiple signals to share the same transmission medium efficiently, ensuring optimal utilization of resources. The digital nature of the switch also facilitated easier integration with emerging technologies, paving the way for more advanced telecommunication services such as data transmission and multimedia communication.

Another characteristic of the AT&T 1782 switch was its reliability. The design emphasized redundancy and fault tolerance, which minimized downtime and improved service quality. This reliability made the switch suitable for various applications, from residential telephony to larger corporate communications.

The AT&T 1782 also supported advanced features like call routing, billing services, and maintenance monitoring. Service providers could implement these functionalities easily, allowing for personalized customer services and more efficient network management.

Overall, the AT&T 1782 embodies a critical advancement in telecommunication technology, providing the backbone for many service providers during a transformative time in the industry. Its combination of high capacity, digital processing, and reliability positioned it as a preferred choice for many communications networks, influencing how calls and data were managed for years to come.