AT&T 1782 user manual Making a Display Dial Call, Display Dial Options

Page 45

CALLER ID OPERATION

Display Dial

NOTE: You must have a phone attached to the unit (see INSTALLATION) and you must lift the receiver for this feature to work.

As you review calls in call history, you can dial a displayed phone number. If the call information came from your Home Area Code (the one you programmed during Installation), the screen displays only the seven-digit number you are calling (without an area code). When you use Display Dial, the system dials the seven displayed digits. If the call information came from outside your Home Area Code, the screen displays the seven- digit number plus the area code. When you use Display Dial, the system dials the 10 displayed digits, plus the digit “1” when appropriate. (See “Home Area Code and Local Area Code Guidelines” in SET UP SYSTEM FEATURES.)

Making a Display Dial Call

1Press Cor cto locate the number in the call history that you want to dial.

2Lift the receiver of the phone connected to the system.

3Press d. The screen displays the name and number being dialed, but you won’t hear the number being dialed. (If you don’t lift the receiver before pressing d, the system will not dial the number. Instead the screen displays Lift Receiver. You will need to repeat Steps 1 through 3.)

NOTE: If there is no number on the screen or the screen displayed Err, no number can be dialed.

Display Dial Options

Use this feature if you need to check or change the way a number in call history is dialed.

1Press Cor cto locate the number you want to call.

42

Page 44 Page 46
Image 45
Page 44 Page 46
Contents USER’S Manual Advanced American Telephones. All rights reserved Page Contents Page About Softkeys ButtonsScreen Indicators Table/Desk Installation InstallationBefore You Begin Connect line cordsFor two single-line wall jacks with a single two-line phone For one two-line wall jack with two single-line phones For two single-line wall jacks with two single-line phones Connect the power cord Wall InstallationInitialization Select display languageStore Home Area Code Set Dial Mode Adjust display contrastSet the clock Set the dateSET UP System Features Feature SetupSet the Time and Date Answering System Feature Setup Announcement OptionsRecord Outgoing Announcement for a Line Delete Outgoing Announcement for a Line Review Outgoing Announcement for a LineRing Select and Toll Saver for a Line Select Outgoing Announcement for a LineRemote Access Code for the System Answer When Recording for a LineChange Priority Call Code for the System Priority Call Signal for the SystemAudible Message Alert for the System Announcement Monitor for the SystemTurn Caller ID with Call Waiting On or Off for a Line Caller ID Feature SetupTurn Incoming Number Announce On or Off Program Area CodesLocal Area Code Guidelines Home Area Code GuidelinesLocal Area Codes Home Area CodeSet Display Screen Language Blocked Call InformationCall Match Feature Setup Set Dial ModeSet Display Contrast Caller Specific Outgoing Announcements Store a Number for Caller Specific Outgoing Announcement Remove a Number for Caller Specific Outgoing Announcement Record a Caller Specific Outgoing AnnouncementReview a Caller Specific Outgoing Announcement Talking Caller ID Delete a Caller Specific Outgoing AnnouncementStore a Number for Talking Caller ID Review a Talking Caller ID Announcement Record a Talking Caller ID AnnouncementDelete a Talking Caller ID Number Answering System Operation Listen to Your Messages Record a Memo Delete MessagesDelete All Messages Delete Selected MessagesRecord a Telephone Conversation When Memory is FullConnect with the Answering System Play MessagesConnect with the answering system Delete Selected Message Record AnnouncementEnd the Remote Access Call Change Remote Access CodeTurn System Off Review Call History Turn System OnMemory Full Voice Help MenuIncoming Number Announce Caller ID OperationCall Waiting Caller ID OperationNEW Call Light Reviewing Call HistoryRemoving Call Records from History Remove Selected Call RecordRemove All Call Records Display Dial Making a Display Dial CallDisplay Dial Options For example Display MessagesDisplay Screen is Blank Case of DifficultyMessages are Incomplete System Does Not Answer After Correct Number of RingsPower Failure Recovery System Does Not Respond to Remote CommandsSystem Hangs Up While Using Display Dial With Speakerphone Screen Displays Extension in Use, and None AreScreen Continues to Display Lift Receiver Screen is FlashingSome of the Message is Not Audible Display Dial Doesn’t WorkUse two #4 screws Template For Wall MountingTo connect with your answering system Remote CommandsRemote Commands

1782 specifications

AT&T 1782 is a significant telecommunications switch that was deployed primarily in the late 20th century, forming an integral part of the phone network infrastructure. This technology played a crucial role in the transition from analog to digital telephony, enhancing the efficiency and reliability of communication services. The AT&T 1782 switch utilized a digital processing architecture, allowing for improved call handling capabilities and a reduction in operational costs.

One of the main features of the AT&T 1782 is its ability to support a high volume of simultaneous calls. With a digital switching capacity, it could handle numerous lines and connections without the performance degradation often seen in older analog systems. This scalability made it an attractive option for many service providers looking to expand their networks while maintaining low latency calls.

In terms of technology, the AT&T 1782 was based on time division multiplexing (TDM), a technique that divides the available bandwidth of a communication medium into time slots. This method allowed multiple signals to share the same transmission medium efficiently, ensuring optimal utilization of resources. The digital nature of the switch also facilitated easier integration with emerging technologies, paving the way for more advanced telecommunication services such as data transmission and multimedia communication.

Another characteristic of the AT&T 1782 switch was its reliability. The design emphasized redundancy and fault tolerance, which minimized downtime and improved service quality. This reliability made the switch suitable for various applications, from residential telephony to larger corporate communications.

The AT&T 1782 also supported advanced features like call routing, billing services, and maintenance monitoring. Service providers could implement these functionalities easily, allowing for personalized customer services and more efficient network management.

Overall, the AT&T 1782 embodies a critical advancement in telecommunication technology, providing the backbone for many service providers during a transformative time in the industry. Its combination of high capacity, digital processing, and reliability positioned it as a preferred choice for many communications networks, influencing how calls and data were managed for years to come.
Top Page Image Contents