AT&T 1782 user manual System Does Not Respond to Remote Commands, Power Failure Recovery

Page 48

IN CASE OF DIFFICULTY

System Does Not Respond to Remote Commands

•Make sure you are calling from a touch tone phone. When you dial a number, you should hear tones. If you hear clicks instead, the phone is not a touch tone telephone.

•There may be noise or interference on the phone line you are using. Press dial buttons firmly.

•Make sure you are entering your Remote Access Code correctly. If the announcement continues after you enter your code, wait for the announcement to end, then re-enter your code.

— OR —

Press #to stop the announcement, then re-enter your code.

•You might be calling from a phone that sends tones too short for your answering system to detect.

Screen Displays Extension in Use, and None Are

Check all line cord connections.

Power Failure Recovery

If the system is disconnected from AC power, it will not operate. Your announcement and messages are retained in memory during a power failure, and the clock will be reset the next time you receive call information.

— OR —

Follow the directions under “Set the Time and Date” in the SET UP SYSTEM FEATURES section of this manual.

NEW CALL Light Remains On

Review the entire call history. The light will go off.

System Hangs Up While Using Display Dial With Speakerphone

Use the handset while the system is dialing, then press Kwhen dialing is complete.

45

Page 47 Page 49
Image 48
Page 47 Page 49
Contents USER’S Manual Advanced American Telephones. All rights reserved Page Contents Page Buttons About SoftkeysScreen Indicators Installation Table/Desk InstallationBefore You Begin Connect line cordsFor two single-line wall jacks with a single two-line phone For one two-line wall jack with two single-line phones For two single-line wall jacks with two single-line phones Wall Installation Connect the power cordInitialization Select display languageStore Home Area Code Adjust display contrast Set Dial ModeSet the clock Set the dateSET UP System Features Feature SetupSet the Time and Date Answering System Feature Setup Announcement OptionsRecord Outgoing Announcement for a Line Review Outgoing Announcement for a Line Delete Outgoing Announcement for a LineSelect Outgoing Announcement for a Line Ring Select and Toll Saver for a LineAnswer When Recording for a Line Remote Access Code for the SystemPriority Call Signal for the System Change Priority Call Code for the SystemAnnouncement Monitor for the System Audible Message Alert for the SystemCaller ID Feature Setup Turn Caller ID with Call Waiting On or Off for a LineTurn Incoming Number Announce On or Off Program Area CodesHome Area Code Guidelines Local Area Code GuidelinesHome Area Code Local Area CodesBlocked Call Information Set Display Screen LanguageCall Match Feature Setup Set Dial ModeSet Display Contrast Caller Specific Outgoing Announcements Store a Number for Caller Specific Outgoing Announcement Remove a Number for Caller Specific Outgoing Announcement Record a Caller Specific Outgoing AnnouncementReview a Caller Specific Outgoing Announcement Talking Caller ID Delete a Caller Specific Outgoing AnnouncementStore a Number for Talking Caller ID Record a Talking Caller ID Announcement Review a Talking Caller ID AnnouncementDelete a Talking Caller ID Number Answering System Operation Listen to Your Messages Delete Messages Record a MemoDelete All Messages Delete Selected MessagesWhen Memory is Full Record a Telephone ConversationConnect with the Answering System Play MessagesConnect with the answering system Record Announcement Delete Selected MessageEnd the Remote Access Call Change Remote Access CodeTurn System Off Turn System On Review Call HistoryVoice Help Menu Memory FullCaller ID Operation Incoming Number AnnounceCaller ID Operation Call WaitingNEW Call Light Reviewing Call HistoryRemoving Call Records from History Remove Selected Call RecordRemove All Call Records Display Dial Making a Display Dial CallDisplay Dial Options Display Messages For exampleCase of Difficulty Display Screen is BlankMessages are Incomplete System Does Not Answer After Correct Number of RingsSystem Does Not Respond to Remote Commands Power Failure RecoverySystem Hangs Up While Using Display Dial With Speakerphone Screen Displays Extension in Use, and None AreScreen is Flashing Screen Continues to Display Lift ReceiverSome of the Message is Not Audible Display Dial Doesn’t WorkTemplate For Wall Mounting Use two #4 screwsRemote Commands To connect with your answering systemRemote Commands

1782 specifications

AT&T 1782 is a significant telecommunications switch that was deployed primarily in the late 20th century, forming an integral part of the phone network infrastructure. This technology played a crucial role in the transition from analog to digital telephony, enhancing the efficiency and reliability of communication services. The AT&T 1782 switch utilized a digital processing architecture, allowing for improved call handling capabilities and a reduction in operational costs.

One of the main features of the AT&T 1782 is its ability to support a high volume of simultaneous calls. With a digital switching capacity, it could handle numerous lines and connections without the performance degradation often seen in older analog systems. This scalability made it an attractive option for many service providers looking to expand their networks while maintaining low latency calls.

In terms of technology, the AT&T 1782 was based on time division multiplexing (TDM), a technique that divides the available bandwidth of a communication medium into time slots. This method allowed multiple signals to share the same transmission medium efficiently, ensuring optimal utilization of resources. The digital nature of the switch also facilitated easier integration with emerging technologies, paving the way for more advanced telecommunication services such as data transmission and multimedia communication.

Another characteristic of the AT&T 1782 switch was its reliability. The design emphasized redundancy and fault tolerance, which minimized downtime and improved service quality. This reliability made the switch suitable for various applications, from residential telephony to larger corporate communications.

The AT&T 1782 also supported advanced features like call routing, billing services, and maintenance monitoring. Service providers could implement these functionalities easily, allowing for personalized customer services and more efficient network management.

Overall, the AT&T 1782 embodies a critical advancement in telecommunication technology, providing the backbone for many service providers during a transformative time in the industry. Its combination of high capacity, digital processing, and reliability positioned it as a preferred choice for many communications networks, influencing how calls and data were managed for years to come.
Top Page Image Contents