A T U R E, T U P, Feature Setup, Feature Summary

F E A T U R E

and hold Suntil the system announces “Number of rings.”

2Press and release Suntil the system announces the feature you want to set.

3Press and release or until the system announces the setting you want. Refer to the Feature Summary for options.

Press and release Sto set up the next feature listed on the Feature Summary

— OR —

Press and release Pto exit Feature Setup.

The new settings will be saved.

Feature/System Announces	Options

Announce Select	Choose from Announcement A or Announce Only.
“Selected announcement is...”	• Select “Announcement A” when you want the
	system to record callers’ messages. Select
	“Announce Only” when you want the system to
	play an announcement and then hang up.
	• If you select “Announcement A” and do not record
	an announcement, the system plays a pre-recorded
	announcement: “Hello. Please leave a message
	after the tone.”
	• If you select “Announce Only” and do not record
	an announcement, the system will answer after 10
	rings and announce“No announcement.”
	See “Record Your Announcement” under OPERATION
	for recording instructions.

Ring Select	Choose how many times the line will ring before the
	system answers a call.
“Number of rings is...”	• Set for 2 to 7 rings, or choose Toll Saver 2/4 or Toll
	Saver 4/6.
	• When set to Toll Saver 2/4, the system answers
	after four rings when you have no new messages
	and after two rings when you do. Toll Saver 4/6
	causes the system to answer after six rings when
	you have no new messages and after four rings
	when you do.