Multi-Brand Control Feature
Multi-Brand Control Setup
The Remote Control can be set to control some TVs.
1Find your TV Brand Code Number on the following page.
2
Set up for TV control,
➛hold down TV button,
➛enter code with NUMBER keys.
3Confirm code entry,
➛ press POWER to turn selected unit on or off.
• See table below for controllable functions in each mode.
Notes • Repeat setup after remote battery replacement.
•Remote will not control every TV made by the manufacturer listed. If you get no response, your particular unit cannot be controlled.
There are NO additional codes for the products listed. If your product is not listed, then the remote is not compatible with that product.
Using Multi-Brand Control
After remote is set up, you can select VCR, DVD, or TV for the desired function.
Press VCR, DVD, or TV on the remote.
(Table below shows available remote buttons for each mode.)
Unit | DVD/VCR | TV | |
Mode | |||
|
| ||
DVD | All | VOL +/- | |
VCR | |||
|
|
EJECT/OPEN/CLOSE *,
DISPLAY, PLAY, STOP,
FF/SLOW+, REW/SLOW-,
TV VCR/TV, PAUSE/STILL, SKIP, AUDIO, CM/ZERO, SPEED, REC,
TAPE POSITION, PAGE,
COUNTER RESET
POWER, INPUT, NUMBER keys, ENTER, CH 
/ 
, VOL +/-
*Bold: VCR Function Bold Italic: VCR and DVD Functions
Italic: DVD Function | Normal: TV |
Notes
•Not all functions listed may be controllable.
•In TV mode, it may be necessary to press ENTER after pressing NUMBER keys for channel selection.
28 | For assistance, please call : |
| |
|
