AT&T 1722 user manual Installation, Before You Install, Turn System On/Off

Page 2

INSTALLATION

Before You Install

Choose a location for the answering system near a modular telephone jack and a standard electrical outlet not controlled by a wall switch.

NOTE: If you do not want to connect a telephone, skip Step 2.

Use only the power cord supplied with this product. If you need a replacement, call 1-800-222- 3111. Input: 120 V, 60 Hz. Output: 6V AC, 350 mA.

1Connect the telephone

line cord.

Standard

 

Electrical

 

Outlet

2 Connect the

Strain-relief tab

telephone (optional).

3 Connect the power cord.

Modular

Telephone

Jack

Turn System On/Off

Before proceeding to set up features, press Oto turn the system on. To turn the system off, press Oagain.

When the system is off, the indicator above the PLAY/STOP button is off and the Message Window is blank.

NOTE: If the Message Window is blank make sure the power cord is securely connected to both the answering system and an electrical outlet not controlled by a wall switch. Press Oto make sure the system is on.

1

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Com.att.telephones.www at us Visit PartTurn System On/Off InstallationBefore You Install Feature Summary Feature SetupFeature Setup Number Announcement AnnouncementMonitor AnnounceOperation Play Light Caller ID Number AnnounceMessage Window Listen to Your MessagesDelete Messages System plays an error tone and does not delete messagesMemory is Full Message Window DisplayListen To, Save & Delete Messages Your new messagesRemote Operation Connect with the Answering SystemStops recording and disconnects the call If the Toll Saver feature is on, the number of ringsCase of Difficulty HaveYour announcement and messages are retained in memory By a wall switch Press O to make sure the system is onTelephone See the instructions on the bottom of the unit
Top Page Image Contents