FEATURE SETUP
Feature Setup
1To enter Feature Setup mode, press and hold S until the system announces
“NUMBER OF RINGS IS…”
2Press and release S until the system announces the feature you want to set.
3Press and release aor runtil the system announces the setting you want. Refer to the Feature Summary for options.
4Press and release S to set up the next feature listed on the Feature Summary
— OR —
Press and release P to exit Feature Setup.
The new settings will be saved.
5After you have selected the feature options, you can review the settings by pressing and releasing S.
When any feature is on, the Message Window displays 
When any feature is off, the Message Window displays 
Feature Summary
FEATURE: | SYSTEM | OPTIONS: |
| ANNOUNCES: |
|
|
|
|
RING SELECT | “NUMBER OF | Choose how many times the line will |
| RINGS IS...” | ring before the system answers a call. |
|
| • Set for 2 to 7 rings, or choose |
|
| Toll Saver 2/4 or Toll Saver 4/6. |
|
| • When set to Toll Saver 2/4, the system |
|
| answers after four rings when you have |
|
| no new messages and after two rings |
|
| when you do. Toll Saver 4/6 causes the |
|
| system to answer after six rings when |
|
| you have no new messages and after |
|
| four rings when you do. |
|
| • During setup, the Message Window will |
|
| display the number of rings, (8 for Toll |
|
| Saver 2/4, or 9 for Toll Saver 4/6). |
|
|
|
REMOTE | “REMOTE ACCESS | Change the Remote Access Code to |
ACCESS CODE | CODE IS...” | any |
|
| • The Remote Access Code, preset to 500, |
|
| allows you to access many features of this |
|
| answering system remotely from a touch |
|
| tone phone. |
|
| • The system will prompt you to repeat |
|
| Steps 2 and 3 of Feature Setup until |
|
| you have set all three digits. |
2