Ricoh Broadband. Digital TV. Phone manual Remote Control, Audio Out

7Video Out Connect to either a VCR or connect to another set of inputs (composite) on you HDTV or SDTV.

8Audio Out

(L/R)

Connect RCA-type cables to Audio Out to send analog audio signals (left and right) to a TV with stereo inputs or to a stereo amplifier.

9Optical Connect an optical cable to send a digital audio signal to a surround-sound receiver or other digital audio device.

( To TV	Connect to TV. This is a chan-
(Video Out)	nel 3/4 output. You must set
	the channel on your TV to the
	correct channel (either chan-
	nel 3 or 4).

)Power Connect the DC output of the AC power adapter (provided) to deliver power to the set-top box.

Remote Control

TDS TV includes a Universal Remote Control, which is programmed to work with your TDS TV set-top box. Use the remote to turn power on/off, navigate through channels, and move within screens. Selections are confirmed by pressing OK. The STB receives signals from the remote. So be sure to point the remote at the STB.

5