BT Converse 2-line Telephone manual Using your Converse 2-Line, To make a call on Line

Page 11

Using your Converse 2-Line

To make a call on Line 1

Press buttons in order shown

Lift the handset and listen for the dial tone. The Line 1 red light comes on.

Dial the number you require.

To end the call, replace the handset.

To receive a call on Line 2

The phone rings and the red

Line 2 Ringer light flashes.

e

2

Press and hold down the Line 2

Lin

 

 

button and lift the handset.

Release the Line 2 button and speak.

To end the call, replace the handset.

To make a call on Line 2

e

2

Press and hold down the Line 2

Lin

 

button and lift the handset.

The Line 2 red light comes on.

Release the Line 2 button.

Dial the number you require and listen for the dialling tone.

To end the call, replace the handset.

To receive a call on Line 1

The phone rings and the red Line 1 Ringer light flashes.

Lift the handset and speak.

To end the call, replace the handset.

To put a call on hold

When a call is placed on hold, you cannot hear your caller and they cannot hear you.

 

 

 

 

During a call:

H

ld

 

 

Press and release the HOLD

o

 

 

 

 

 

 

 

button.

 

 

 

 

The IN USE light changes from red

 

 

 

 

to green and the call is on hold.

Lin

e

1

To take the call off hold, press

 

 

 

 

 

 

 

 

 

the Line 1 or 2 button (depending

 

 

e

2

on which line you are using. The

Lin

 

green light changes back to red and you can talk to your caller.)

8

Image 11
Contents Converse Line Telephone User GuidePage Page Pause At a glanceLeft Hand Side View Right Hand Side View This guide Unpacking your Converse 2-Line Installing your Converse 2-LineFor your records Check your telephone Wall socket Install the batteriesSituating your Converse 2-Line Connect the telephone Line cords Set the connection Mode switchWhen replacing old batteries Battery low warningSet the time and date Set the ringer volumeTo put a call on hold Using your Converse 2-LineTo make a call on Line To receive a call on LineOwners label To switch the alarm on and offTo redial the last number called To make a handsfree call on LineLine 1 or 2 button depending on To put a call on hold and answer a new call Using 2 LinesTo switch between calls on Line 1 and Line To end one call to answer a new callTo speak privately to one line only Way Conference CallsTo make a 3-Way Conference Call To end one call onlyTo store a number Using the Quickdial memory buttonsTo store a pause To view numbers stored in the memories To dial a Quickdial number To view another Quickdial numberTo delete numbers stored in the Quickdial memories Auto redial Using the Recall buttonLast number redial Help If you have to return your Converse 2-Line MaintenanceService GeneralConnection information Technical informationEnvironment How many phones can you have?Wall mounting 83mm Handsfree IndexBatteries Conference callsOffices in Europe, North America, Japan and Asia Pacific