BT Converse 2-line Telephone manual Connect the telephone Line cords, Connect the handset to Base

Page 9

When replacing old batteries

If you have stored One-touch numbers and are replacing low batteries, you need to make sure that you maintain a power supply while the batteries are removed. You do this in order to retain the memory by taking the handset off the hook before removing the old batteries. Do not unplug the telephone line cords. Once the new batteries are in, you can replace the handset.

Battery low warning

When the display flashes LOW BATTERY, the HOLD button will not work until new batteries have been installed.

If the batteries go completely flat, any One-touch numbers that have been stored will be lost.

Connect the telephone

4line cords

Push the end of the cord with the transparent plug on it into the socket on the base unit. If you are connecting to one line only, use the L1 socket. If you are using both lines, use both L1 and L1/L2 sockets.

Plug the other end of the cords into the telephone sockets.

Connect the handset to

3the base

Plug one end of the coiled line cord into the handset and the other into the base.

Please note

When you pick up the handset, Line 1 is automatically selected. Therefore, when connecting to two lines, the telephone line cord connected to L1 should be plugged into the most frequently used line. This will save you having to press a Line button in order to answer the majority of calls. See ÔMaking and receiving callsÕ page 8Õ.

Set the connection

5mode switch

•If connecting to one telephone line only, set the Connection Mode switch to 1x.

•For two lines, set the Connection Mode switch to 2x.

6

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Converse Line Telephone User GuidePage Page Pause At a glanceLeft Hand Side View Right Hand Side View This guide Installing your Converse 2-Line For your recordsUnpacking your Converse 2-Line Install the batteries Situating your Converse 2-LineCheck your telephone Wall socket When replacing old batteries Set the connection Mode switchBattery low warning Connect the telephone Line cordsSet the time and date Set the ringer volumeTo make a call on Line Using your Converse 2-LineTo receive a call on Line To put a call on holdTo redial the last number called To switch the alarm on and offTo make a handsfree call on Line Owners labelLine 1 or 2 button depending on To switch between calls on Line 1 and Line Using 2 LinesTo end one call to answer a new call To put a call on hold and answer a new callTo make a 3-Way Conference Call Way Conference CallsTo end one call only To speak privately to one line onlyUsing the Quickdial memory buttons To store a pauseTo store a number To dial a Quickdial number To view another Quickdial number To delete numbers stored in the Quickdial memoriesTo view numbers stored in the memories Using the Recall button Last number redialAuto redial Help Service MaintenanceGeneral If you have to return your Converse 2-LineEnvironment Technical informationHow many phones can you have? Connection informationWall mounting 83mm Batteries IndexConference calls HandsfreeOffices in Europe, North America, Japan and Asia Pacific
Top Page Image Contents