BT Converse 2-line Telephone manual Using 2 Lines, To end one call to answer a new call

Using 2 Lines

Answering a second, incoming call

If, during a call, a second call comes in on the other line:

The Ringer light comes on. The ringer sounds but at a lower volume than normal. You can answer the new call either by ending your current call or by putting the call on hold.

To end one call to answer a new call

Press buttons in order shown

e	1	Press the Line 1 or 2 button –
Lin
		whichever line is ringing.
e	2	Your phone will hang up on your
Lin

current line and pick up the incoming call.

To put a call on hold and answer a new call

USEFUL TIP

When ending a call in order to return to your original caller, do not hang up the handset or, (if using handsfree) press the HANDSFREE button as both calls will be ended.

To switch between calls on Line 1 and Line 2

You can put one call on hold in order to make or answer a call on the second line, and then switch between the two calls.

While one call is on hold and you are talking to a second caller on the other line:

	ld		Press and release the HOLD
o
H
			button. Both calls are now on hold.
			Both green lights are on.
	e	1	Press the Line 1 button to talk to
Lin
			the caller on Line 1.

	ld
o
H

Lin	e	1
Lin	e	2

				ee
			fr
			s
		d
H	a	n

Press and release the HOLD button. The green Hold light comes on. Your current caller is put on hold.

Press the Line 1 or 2 button – whichever line is ringing. Your phone will pick up the incoming call.

End the new call and return to your original caller by pressing the Line button of the call that is on hold.

	ld			Press and release the HOLD
o
H
				button to put both calls on hold.
Lin		e	2	Press the Line 2 button to talk to
				the caller on Line 2.
Lin		e	1	Press the Line button of the call

you want to continue. The other line is disconnected and you can talk to your remaining caller.

11