BT Converse 2-line Telephone Situating your Converse 2-Line, Check your telephone Wall socket

Page 8

Situating your

Converse 2-Line

Situate your Converse 2-Line close enough to a phone socket so the telephone line cords will reach.

Do not stand it on carpets or other similar surfaces that generate fibres.

Do not cover or enclose the machine.

Your Converse 2-Line can be wall mounted. See ‘Wall mounting’ on page 19.

WARNING

Your Converse 2-Line is only designed to be operated in a normal office or domestic environment. It should not be used in bathrooms or near water.

Check your telephone

1wall socket

If you do not have a modern style socket, call Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct socket.

This is a chargeable service.

2Install the batteries

Your Converse 2-Line is designed for use with 3 x AA size alkaline batteries.

Please note

If you do not fit batteries or if they go flat, your phone can still make and receive calls but many useful functions will not operate.

The following require batteries in order to work:

•In Use/Hold LED.

•Loudspeaker.

•3-Way Conference button.

•One-touch memories.

•Redial button.

•Hold button.

•LCD Display and clock.

Battery compartment cover

Battery compartment

Lock

Pull-out quick guide

•Remove the Pull-out guide underneath the base unit.

•Open the battery compartment cover by pushing the Lock back and lifting the cover.

•Insert the 3 AA alkaline batteries as shown inside the battery compartment.

•Replace the cover and click into place.

5

Page 7 Page 9
Image 8
Page 7 Page 9
Contents User Guide Converse Line TelephonePage Page At a glance Pause Left Hand Side View Right Hand Side View This guide Unpacking your Converse 2-Line Installing your Converse 2-LineFor your records Check your telephone Wall socket Install the batteriesSituating your Converse 2-Line Set the connection Mode switch When replacing old batteriesBattery low warning Connect the telephone Line cordsSet the ringer volume Set the time and dateUsing your Converse 2-Line To make a call on LineTo receive a call on Line To put a call on holdTo switch the alarm on and off To redial the last number calledTo make a handsfree call on Line Owners labelLine 1 or 2 button depending on Using 2 Lines To switch between calls on Line 1 and LineTo end one call to answer a new call To put a call on hold and answer a new callWay Conference Calls To make a 3-Way Conference CallTo end one call only To speak privately to one line onlyTo store a number Using the Quickdial memory buttonsTo store a pause To view numbers stored in the memories To dial a Quickdial number To view another Quickdial numberTo delete numbers stored in the Quickdial memories Auto redial Using the Recall buttonLast number redial Help Maintenance ServiceGeneral If you have to return your Converse 2-LineTechnical information EnvironmentHow many phones can you have? Connection informationWall mounting 83mm Index BatteriesConference calls HandsfreeOffices in Europe, North America, Japan and Asia Pacific
Top Page Image Contents