BT Converse 2-line Telephone manual Help

Page 19

Help

If you have trouble making or receiving calls, try checking the telephone line by replacing your Converse 2-Line with a known working product.

Phone does not ring for incoming calls

Check that the Ringer Volume switch is not set to off.

Handsfree calls on the speaker are quiet

Check that the Speaker Volume switch is not in the minimum position .

One of the IN USE lights is always on

If you have only one line connected to your phone, check that it is connected to the socket on the base marked L1 and that the Connection Mode switch is set to x1.

Cannot get Line 2

Check that both telephone line cords are connected and ‘clicked’ into place.

Check that the Connection Mode switch is set to x2.

No lights come on

Check that batteries are fitted and that they are not low on power.

HOLD does not work.

The HOLD button requires battery power in order to work. It will stop working when the display shows LOW BATTERY.

Display only works when handset is lifted

Batteries need replacing immediately.

3-Way Conference Calls are quiet

In some circumstance, the volume and quality of 3-Way Conference Calls may be affected due to your Converse 2-Line regulating the audible levels of 3-way calls. If these levels become unacceptable then BT’s Select Service 3-Way Calling will give you an effective alternative.

16

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Converse Line Telephone User GuidePage Page Pause At a glanceLeft Hand Side View Right Hand Side View This guide For your records Installing your Converse 2-LineUnpacking your Converse 2-Line Situating your Converse 2-Line Install the batteriesCheck your telephone Wall socket Connect the telephone Line cords Set the connection Mode switchWhen replacing old batteries Battery low warningSet the time and date Set the ringer volumeTo put a call on hold Using your Converse 2-LineTo make a call on Line To receive a call on LineOwners label To switch the alarm on and offTo redial the last number called To make a handsfree call on LineLine 1 or 2 button depending on To put a call on hold and answer a new call Using 2 LinesTo switch between calls on Line 1 and Line To end one call to answer a new callTo speak privately to one line only Way Conference CallsTo make a 3-Way Conference Call To end one call onlyTo store a pause Using the Quickdial memory buttonsTo store a number To delete numbers stored in the Quickdial memories To dial a Quickdial number To view another Quickdial numberTo view numbers stored in the memories Last number redial Using the Recall buttonAuto redial Help If you have to return your Converse 2-Line MaintenanceService GeneralConnection information Technical informationEnvironment How many phones can you have?Wall mounting 83mm Handsfree IndexBatteries Conference callsOffices in Europe, North America, Japan and Asia Pacific
Top Page Image Contents