service type
service addr
service id
nat traversal
nat addr
nat ttl
phone number
account
pin
The default service type is common. For other requests, please find the service type in the drop down list.
•Use H.323 protocol
If the Use Service option is checked, please fill up the IP address or the domain name of the gatekeeper.
If the Use Service option is unchecked, please fill up the IP address or the domain name of the voice gateway.
•USE MGCP protocol: Please fill up the IP address or domain name of the Call Agent.
•Use SIP protocol: If the Use Service option is checked, please fill up the IP address or domain name of the SIP Proxy Server in this field.
Set service ID according to requirement of system.
When using a private IP to traverse the NAT, select one of the conditions:
•disable
When
When
•enable
Automatically check the public IP of the NAT router. When
•stun
Use the STUN protocol. STUN enables a device to find out its public IP address and the type of NAT service its sitting behind. It helps the SIP traverse the NAT. If this option is selected, please also fill up the IP address of the STUN server in the nat addr field.
•When stun or enable is enabled in the nat traversal field, enter the NAT Proxy’s IP address. Otherwise, keep this field as 0.0.0.0.
This defines how many seconds a NAT traversal message is will be sent to the NAT server. The default setting is 30 seconds.
With H.323/MGCP/SIP protocol used, enter the phone number of the
•When using the H.323 protocol to logon gatekeeper, please fill up the H.323 ID or H.235 account.
•When choose the prefix in dialplan field, please fill up the number provided by ISR, card number and “#”. For example 14589653185#
•With MGCP protocol used, please enter the Local name of the EndpointID into this field.
•With SIP protocol used, fill up the SIP Proxy account.
•When H.323 protocol is used to logon the gatekeeper, fill up the password or H.235 authentication password.
•When SIP protocol is used to logon SIP Proxy Server, please fill up the password into this field.
•When choose the prefix in the use dialplan
19