ArtDio IPF-2000L user manual

IPF-2002L User Manual

register port

signal port

control port

register ttl

rtp tos

rtp port

local type

call type

dtmf

up the password provided by ISR, card number, and “#”. For example 3185#.

•With MGCP protocol used, enter the domain name of the EndpointID into this field.

※With MGCP protocol is used, as requested by some system, please add the bracket with the domain name. For example, [voiptest.com]. According to used protocol, set as follows:

• With H.323 protocol used,

ƒIf the gatekeeper is used, the register port works as the gatekeeper’s monitor port. The default value is 1719.

ƒIf the gatekeeper is not used, the register port works as the end point device or the gatekeeper’s monitor port. The default value is 1720.

•With MGCP protocol used, this port is the Call Agent’s receive port. The default value is 2727.

•With SIP protocol used, the default setting is 5060.

With H.323 protocol used, this port is mapped to the Q.931 port. For H.323, the Q.931 call usually uses TCP protocol. The value can be set between 1024 and 65535.

zWith H.323 protocol used, this port is H.245 port using TCP protocol. H.245 protocol defines call control signal, and uses TCP protocol. The value can be set between 1024 and 65535.

zWith MGCP and SIP used, there is no specific request for this port. You can enter any number.

※If there are many IPF-2002L traversing the NAT at the same time, each IPF-2002L should be assigned with different port number.

This defines how many seconds a register message will be sent to the server. The default setting is 60 second.

Fill TOS segment of IP header in RTP digital follow here. Detailed information please refer to IP protocol information.

RTP port is the port transferring and receiving voice flow using UDP protocol. Please fill an even number between 1024 and 65535 into this field. This parameter refers to how IPF-2002L log in gatekeeper or SIP Proxy server. The meaning of each item is as follow:

• Phone number:

Use phone number as E.164 and H.323 ID to login the gatekeeper.

• Account

Use account authentication to login. Please also fill up the account name and password into the account and pin fields.

• H.235 account

With H.323 protocol used, if the gatekeeper supports H.235 protocol, please choose this option. Please also fill up the account name and password into the account and pin fields.

Set call type by selecting the items in drop down list. There are three options: normal, faststart, advanced. The recommended way is advanced. Set DTMF signal sending way by selecting control string, inband audio,

20