ArtDio IPF-2000L user manual Configure the IPF-2002L Using Keypad, Network Settings

Page 12

IPF-2002L User Manual

5. Configure the IPF-2002L Using Keypad

IPF-2002L can be configured with its keypad or on a web page. The following table below illustrates the configuration function keys when using the keypad:

Keys

Function

SPD / HOLD

To change settings when using the keypad configuration

REDIAL / MUTE

To main menu options when using the keypad configuration

VOL -

To the next page when using the keypad configuration

VOL +

To the previous page when using the keypad configuration

Enter

To confirm the setting when using the keypad configuration

5.1 Network Settings:

The default network setting for IPF-2002L is DHCP. Therefore, if you connect your IPF-2002L to a DHCP network, it will direct connect to the Internet without any network setting.

If the network environment is PPPoE or Static IP, please change the network setting on your phone to PPPoE or Static IP. You can use the keypad to change your phone network setting. If you don’t know what kind of network environment you are at, please contact your Internet Service Provider.

Use the keypad configuration and choose the【network settings】. Please configure your phone

to DHCP, Static, or PPPoE according to your network environment.

5.1.1 PPPoE Setting

1.Connect the PPPoE network to the RJ-45 port of the IPF-2002L, and then plug in the power.

2.Press 1234# (Hold the “#” key) Æ LCD shows【password】Æ Press 1234 and then press ENTER Æ LCD shows 【network settings】.

3.Press ENTER Æ LCD shows 【iptype】Æ press SPD/HOLD Æ Blinking cursor Æ Press 2 and then press ENTER. (2 sets your networking settings the PPPoE mode)

4.Press ENTER Æ LCD shows 【pppid】Æ Press SPD/HOLD Æ Input PPPoE account number and then press ENTER.

5.Press ENTER Æ LCD shows【pppin】Æ Press SPD/HOLD Æ Input PPPoE password and then press ENTER Æ Press ENTER again to complete the configuration.

™If you want to input symbols or characters such as @, A, a, B, b, C, c, please refer to the keypad mapping table in Appendix 10.1.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents ARTDio V1.0Safety Instructions Contents Passing Through the NAT/FIREWALL Product Specification Package Contents IPF-2002L Functions Front PanelRear and Back Panel Status Indicators Function KeysHardware Installation Connection with a RouterConnection without a Router Configure the IPF-2002L Using Keypad Network SettingsProtocol Settings Static IP SettingAudio Settings EnterOther Settings Speed Dial SettingsDefault Settings Save SettingsExit Settings WEB Configuration Networking Parameter Values2Protocol Settings Router ip Dns Dns2Page Page Phone Settings Phone Parameter ValuesAudio Parameter Values 5Other Settings Update7Phone Book Page Passing through the NAT/Firewall 1SIP with StunSIP with Outbound Proxy OthersPage Using IPF-2002L Registration MessagePickup the Phone Making Phone CallsCheck the IPF-2002L Call Records Speed DialMute 6HoldIPF-2002L Keypad and Symbols Mapping Table 10.2 H.323 Web Configuration ExsampleAppendix Mgcp Web Configuration Exsample How to Add a Prefix in Front of the Number Some TroubleshootingIPF-2002L Keypad Selection Tree Using administrator password Page Page Page Los Angeles Office, U.S.A
Top Page Image Contents