ArtDio IPF-2000 user manual Network

Page 15

IPF-2000 User Manual

The following are the definitions for all the configuration parameters in the Web Configuration Page:

6.1. Network

 

 

Network

Fields

 

Description

 

Set how IPF-2000 gets relevant network parameters by selecting corresponding item from drop

 

down list.

 

z

static

 

Select this option to authorize users to configure IP address, subnet mask and router IP address

 

of IPF-2000 manually.

 

z

dhcp

iptype

Select this option to enable DHCP server automatically assign all the required network

parameters to IPF-2000.

 

z

pppoe

 

Select this option and then fill up the ppp id and ppp pin with PPPoE account and Password to

 

enable the PPPoE connection. The ISP provider will automatically assign all the required IP

 

parameters to IPF-2000.

 

z

modem

 

Select this option and fill up the ppp id and ppp pin field with ID and password to enable the

 

modem connection.

ppp id

With PPPoE or modem selected in iptype drop down list, please enter the user name in this field.

ppp pin

With PPPoE or modem selected in iptype drop down list, please enter the password in this field.

local ip

With Static selected in iptype drop down list, please enter the IP address of the IPF-2000 in this

field.

 

 

 

subnet mask

With Static selected in iptype drop down list, please enter the Subnet Mask address of the

IPF-2000 in this field.

 

router ip

With Static selected in iptype drop down list, please enter the router IP address of the IPF-2000

in this field.

 

Dns

With Static selected in iptype drop down list, please enter the IP address of the DNS server in

this field.

 

dns2

With Static selected in iptype drop down list, please enter the IP address of the backup DNS

server in this field.

 

mac

Please fill up the MAC address in this field. The MAC address is the physical address supplied

by the Ethernet NIC which can be found on the back of the phone base.

 

15

Image 15
Contents ArtDio Company Inc Safety Instructions Hardware Installation Keypad Configuration Table of ContentRegistration Message Using IPF-2000 Product Specification IPF-2000 Function Illustration Package ContentsKeys Function Rear and Back Panel Function Keys IntroductionKeypad Configuration Hardware InstallationStatic IP Setting Dhcp SettingsPPPoE Setting Protocol SettingsAudio Settings Other SettingsSet IPF-2000 handset and speaker phone volumes Exit Setting Speed dial SettingsRevert Back to Factory Default Save SettingsWEB Configuration Page Network NetworkProtocol ProtocolNat ttl Service idNat traversal Nat addrPhone Phone Audio AudioOther UpdateOthers Phone BookRegistration Message Using IPF-2000Appendix Programming KeysFrequently Ask Questions