ArtDio IPF-2000 user manual Phone

Page 18

IPF-2000 User Manual

 

z With H.323 protocol used,

 

 

ƒ If the gatekeeper is used, the register port works as the gatekeeper’s monitor port.

 

 

The default value is 1719.

 

 

ƒ If the gatekeeper is used, the register port works as the end point device or the

 

 

gatekeeper’s monitor port. The default value is 1720.

 

z With MGCP protocol used, this port is the Call Agent’s receive port. The default value is

 

 

2727.

 

z With SIP protocol used, the default setting is 5060.

signal port

With H.323 protocol used, this port is mapped to the Q.931 port. For H.323, the Q.931 call

usually uses TCP protocol. The value can be set between 1024 and 65535.

 

 

z With H.323 protocol used, this port is H.245 port using TCP protocol. H.245 protocol

 

 

defined call control signal, and uses TCP protocol. The value can be set between 1024

 

 

and 65535.

control port

z

With MGCP and SIP protocol used, there is no specific request for this port. Please fill

 

 

in any number.

 

If there are many IPF-2000 traversing in the NAT at the same time, each IPF-2000

 

should be assigned with different port number.

register ttl

This defines how many seconds a register message will be sent to the server. The default

setting is 60 second.

 

rtp tos

Fill TOS segment of IP header in RTP digital follow here. Detailed information please refer to

IP protocol.

 

rtp port

RTP port is the port transferring and receiving voice flow using UDP protocol. Please fill an

even number between 1024 and 65535 into this field.

 

 

With H.323 protocol used, this parameter refers to how IPF-2000 log in gatekeeper or SIP

 

Proxy server. The meaning of each item is as follow:

 

z

Phone number

local type

Use phone number as E.164 and H.323 ID to login the Gatekeeper.

z

Account

 

Use account authentication to login. Please also fill up the account name and password into

 

the account and pin fields.

 

z

H.235 account

 

With H.323 protocol used, if the Gatekeeper supports H.235 protocol, please choose this

 

option. Please also fill up the account name and password into the account and pin fields.

call type

Set call type by selecting the items in drop-down list. There are three options: normal,

faststart, advanced. The recommended way is advanced.

 

 

Set DTMF signal sending way by selecting control string, inband audio, signal keypad or RFC

dtmf

2833 from drip-down menu.

 

 

 

If you can not dial the extensions, please set the dtmf as inband audio.

6.3. Phone

18

Image 18
Contents ArtDio Company Inc Safety Instructions Table of Content Hardware Installation Keypad ConfigurationRegistration Message Using IPF-2000 Product Specification Package Contents IPF-2000 Function IllustrationRear and Back Panel Function Keys Introduction Keys FunctionHardware Installation Keypad ConfigurationDhcp Settings Static IP SettingProtocol Settings PPPoE SettingAudio Settings Other SettingsSet IPF-2000 handset and speaker phone volumes Save Settings Speed dial SettingsRevert Back to Factory Default Exit SettingWEB Configuration Page Network NetworkProtocol ProtocolNat addr Service idNat traversal Nat ttlPhone Phone Audio AudioPhone Book UpdateOthers OtherUsing IPF-2000 Registration MessageAppendix Programming KeysFrequently Ask Questions