ArtDio IPF-2000 Speed dial Settings, Revert Back to Factory Default, Save Settings, Exit Setting

Page 12

IPF-2000 User Manual

5.5. Speed dial Settings

1.Press1234#( Hold the “#” key)→ [Password]→ Press 1234 and then press ENTER→ Network Settings Press1234#( Hold the “#” key)→Press Vol.-(volume increasing button) 4 times→ [speed dial settings]

2.Set speed dial number

In [speed dial settings] press ENTER once→ [memory1] → press SPD/HOLDto choose the first speed dial number and then press ENTER press ENTER again→ [number1] → press SPD/HOLD, input the first set of telephone numbers and then press ENTER.

3.Please repeat step 2 when more numbers need to be stored. IPF-2000 has a capacity to store 100 phone numbers for speed dial.

5.6.Revert Back to Factory Default

1.Press1234#( Hold the “#” key)→ [Password]→ Press 1234 and then press ENTER→ Network Settings Press1234#( Hold the “#” key)→Press Vol.-(volume increasing button) 5 times→ [Default Settings]

2.Press ENTER→Are You Sure?

Select Yes and [Default ok] will appear on the screen→ press REDIAL/MUTE multiple times when you see [Undo Default Settings] → [save settings] → The phone will reboot itself.

Select No to choose not to revert back to factory default.

5.7. Save Settings

When configurations are complete and confirmed press REDIAL/MUTE multiple times until [save settings] appear on the screen→ press ENTER→ Are You Sure?

zPress ENTER for Yes and IPF-2000 will reboot and save the new settings

zPress REDIAL/MUTE for No, IPF-2000 will then go back to Keypad settings.

5.8.Exit Setting

Press REDIAL/MUTE multiple times until [Exit] appear on the screen→ press ENTER for Yes, IPF-2000 will then reboot.

12

Image 12
Contents ArtDio Company Inc Safety Instructions Table of Content Hardware Installation Keypad ConfigurationRegistration Message Using IPF-2000 Product Specification Package Contents IPF-2000 Function IllustrationRear and Back Panel Function Keys Introduction Keys FunctionHardware Installation Keypad ConfigurationDhcp Settings Static IP SettingProtocol Settings PPPoE SettingAudio Settings Other SettingsSet IPF-2000 handset and speaker phone volumes Speed dial Settings Revert Back to Factory DefaultSave Settings Exit SettingWEB Configuration Page Network NetworkProtocol ProtocolService id Nat traversalNat addr Nat ttlPhone Phone Audio AudioUpdate OthersPhone Book OtherUsing IPF-2000 Registration MessageAppendix Programming KeysFrequently Ask Questions