Ameriphone JB-20 operating instructions Enter the phone number as you would normally dial it

Page 9

CHAPTER 5 (CONTINUED

1.Lift the handset and press the PROG button.

4.Press one of the Emergency buttons.

Fig. 12 - Prog button

2.Enter the phone number as you would normally dial it.

Fig. 13 - Telephone keypad

3. Press PROG button again.

Fig. 14 - Prog button

Fig. 15 - Emergency button

5.Hang up the handset.

6.The number is now stored into the Emergency button you selected.

7.To change a stored number or to program another memory button, repeat this process from step 1.

Dialing With An Emergency Button

1.Lift the handset.

2.Press one of the Emergency buttons.

The number you have stored for that button will be automati- cally dialed.

7

Image 9

Contents Operating Instructions Important Safety Instructions Contents Warranty Service Hold Lift the handset and listen for a dial tone Adjust the Ringer Tone selector to suit your hearing Adjust the Ringer volume control to suit your hearing Enter the phone number as you would normally dial it Lift the handset and press the Prog button Direct Audio Output Symptom Cause Corrective Action Chapter FCC Information Chapter Warranty Decibel Gain Helping people communicate easier