AT&T 7401, System 75, Generic 3 manual Answering or Placing a Second Call

7 Press [ # ] [confirmation tone] then [dial tone]

Note: Repeat Steps 5-7 if you want to program additional items on the same list. Hang up and begin again at Step 1 if you want to program items on another personal list.

8Hang up

●Record the personal list item on the Abbreviated Dialing list in the back of this booklet.

To place a call from a list	1 Dial appropriate List code:
(personal, system, group,	●	List 1
or enhanced)			[dial tone]
	●	List 2

● List 3

or Press [ Feature ], then the appropriate entry number (if you have a list code programmed as a Feature Directory entry)

2 Dial desired list item (1, 2, 3...) [ringback tone]

Note: Keep your own personal lists in the back of this booklet; system, group, and enhanced lists are available from your System Manager.

	Answering or Placing a Second Call				✔
To end first call and		1	Ask first caller to hang up, then flash the switchhook
answer second call			●	Second call is connected
			Note: Depending on how your system is
			administered, the incoming call may be limited to
			priority calls. Check with your System Manager.
To put first call on hold		1	Press [ Feature ], then [ # ]
and answer second call			● First call is put on hold
		2	Flash the switchhook
			●	Second call is connected

9