Select Ring, Send All Calls | AT&T System 75, 7401, Generic 3

Select Ring

To select a personalized ring pattern

1Press [ Feature ], then [ * ] (leave handset on cradle)

●Green light flutters intermittently

●Voice terminal plays current ring pattern

2Adjust the ringer volume with the sliding ringer control on back of voice terminal if desired

3Press [ * ] again to hear the next ring pattern

Note: There are 8 different patterns; cycle repeats after the last pattern.

4Press [ Feature ] when you hear the desired ring pattern

●Your new ring is set; selection process ends

Note: If you receive a call, go off-hook, or lose power during selection, the process is interrupted and you must start again.

To send all calls (except priority calls) immediately to coverage

1Press [ Feature ], then the Send All Calls entry number [dial tone]

or Dial Send All Calls code

[confirmation tone]

Note: When a call comes to your extension, call activity light will flutter and you may hear

a ring-ping tone indicating that the call has been sent to coverage.

To cancel Send All Calls	1 Press [ Feature ], then the Send All Calls	[dial tone]
	entry number again	[dial tone]

or Dial Send All Calls Cancel code

[confirmation tone]