How to Use the Feature Directory

The Feature Directory, shown in Figure 2, provides a convenient quick reference list for 12 features which can be accessed by first pressing [ Feature ] and then pressing the corresponding entry number (1-9and 0) or character (# and *) on the dial pad. For example, to put a call on hold, you would press [ Feature ], then [ # ]. And to set up a

conference you would begin by pressing [ Feature ], then [ 8 ]. The green light next to [ Feature ] goes on steadily when the button is pressed to let you know that your dial

pad is now in the feature selection state.

Your Feature Directory will look like the one shown in Figure 2:

If entries F1-F7are blank, your System Manager may assign features to them, and you can write or type in the name of the features assigned.

Feature Directory

F8 Conference (F8, dial party, F8)

F9 Transfer (F9, dial party, F9)

F0 Drop (Disconnect last party)

F# Hold (Press switchhook to return)

F* Select Ring (Press Feature to store)

Press Feature button, then dial pad button

Figure 2. Assignable Feature Directory

The last 5 features on the Feature Directory are fixed:

F8 Conference

F9 Transfer

F 0 D r o p

F # H o l d

F* Select Ring

Note: You are not limited to the 12 features shown on your directory. All other features available with your DEFINITY® Communications System Generic 1 or System 75 can be accessed by simply dialing a 1-, 2-, or 3-digit feature code, without using [ Feature ]. Your System Manager can supply those codes for you.