Speaker
Note: Your voice terminal is set for either the Speaker
Use the following procedures if your voice terminal is set for the Speaker (listen only) feature.
To place a call without lifting the handset, or to use speaker with any feature activity (such as monitoring a call on which you have been put on hold, or for group listening)
Note: In order for the other party to hear you, you must speak through the handset.
1Press [ Speaker ]
2Place call, or access selected feature
3Adjust speaker volume if necessary
●To raise the volume, press the right half of the Speaker Volume control button labeled [ ▲ ]; to lower the volume, press the left half of the Speaker volume control button labeled [ ▼ ]
●If you have a display, it shows
[ SPEAKER L >>>> H ] (there are 8 possible volume settings)