Abbreviated Dialing, Dial list item 1, 2 Dial tone

Abbreviated Dialing	[ _ ]

Note: The 8503T voice terminal allows 12 programmed memory-dialing locations accessed with the dial pad buttons. At these dial pad locations, you can store telephone numbers or access codes. In addition, the DEFINITY Communications System allows you to store numbers in a maximum of 3 Abbreviated Dialing lists.

To program or reprogram an outside number, extension, or feature code into a personal list

1On a separate sheet of paper, jot down the outside numbers, extensions, and/or feature codes you want to program as items on your personal list(s) (see example to the left)

Note: Each telephone number or feature code is stored as a separate list item.

2 Pick up handset

[dial tone]

3Dial Abbreviated Dialing Program code

[dial tone]

4Dial personal list number (1, 2, or 3)

5 Dial list item (1, 2, 3...)

[dial tone]

6Dial number you want to program (up to 24 digits)

Note: If you are programming an outside number, be sure to include a trunk code, if applicable.

7 Press [ # ]

[confirmation tone]

●Number is stored

●Repeat Steps 5 through 7 if you want to program additional items on the same list; hang up and begin again at Step 1 if you want to program items on another personal list

8Hang up to end programming

Note: Keep your own personal lists in the Abbreviated Dialing table provided in the back of this booklet; group, system, and enhanced lists are available from your System Manager.