Conference

2.Do one of the following:

a.Press Feature , and then press the dial keypad number assigned to the Call Pickup feature.

b.Press an idle call appearance button, then dial the Call Pickup feature access code _____.

■You are connected to the incoming call.

The Conference feature allows you to set up a six-party conference call without attendant assistance. You cannot create a conference call when the first party is the attendant.

To establish a conference call while on a two-party call, do the following:

1.Press Conf .

■The existing call is put on hold, and you hear a dial tone.

2.Dial the number of the new party, and wait for an answer.

■You can privately discuss the call with the new party at this time. If you want to establish the conference call, continue with Step 3.

If there is no answer or the line is busy, press the held call appear- ance button to return to the held call.

3.Press Conf again.

■All parties are connected on the conference call.

4.Repeat Steps 1 through 3 to add more parties to the conference call.

To create a conference call when you have a call on hold and you have a second active call, do the following:

1.Press Conf .

■The active call goes on hold, and you hear a dial tone.

14Issue 1 March 1996