Self-Test
To test the lamps on your voice terminal, do the following:
1.Press and hold 
Test 
.
■All the lamps go on.
2.Release 
Test 
to end the test.
■All the lamps go off, except for the 
Test 
lamp, which stays green for a few seconds.
Send All Calls
The Send All Calls feature immediately redirects your calls to your predefined Call Coverage path. You can use this feature when you do not want to be dis- turbed. If a coverage path is not administered, this feature does not work.
To use Send All Calls, do the following:
1.Go
■You hear a dial tone.
2.Do one of the following:
a.Press 
Feature 
, and then press the dial keypad number assigned to the Send All Calls feature.
■You hear a dial tone.
b.Dial the Send All Calls activation feature access code _____.
■You hear a confirmation tone.
3.Go
Issue 1 March 1996 21