Spracht CP-2012 manual Conference Phone Operation with Digital Phone System

Page 12

Digital Systems

Conference Phone Operation with Digital Phone System

Answering a call

1.When the phone rings, pick up the digital telephone handset to accept the call.

2.Press the ON/OFF key to take the call on the Conference Phone. The green LED illuminates to indi- cate the Conference Phone is on; the microphone in the digital telephone handset is disabled while the Conference Phone is on.

Note: the digital telephone handset must remain off-hook for the duration of the call.

Adjusting the speaker volume

While a call is in progress use the ▼ (decrease volume) and ▲ (increase volume) keys to adjust the speaker volume. The speaker volume setting is saved until adjusted again.

Note: When a call is not in progress, pressing the volume keys adjusts the ringer volume. The ringer volume setting is saved until adjusted again.

Placing a call

1.Pick up the digital telephone handset and dial the call.

2.Press the ON/OFF key to take the call on the Conference Phone.

Note: with a digital telephone system, you must use the digital telephone to dial all calls. You cannot use the Conference Phone keypad to dial or redial calls with a digital telephone system.

Note: the digital telephone handset must remain off-hook for the duration of the call.

Muting a conversation

To turn off all microphones during a conversation, press the MUTE key. Microphone LEDs change to red to indicate conference participants cannot be heard at the other end of the line. Press the MUTE key again to turn on the microphones.

Ending a call

Hang up the digital telephone handset.

Press the ON/OFF key. The green LED will extinguish.

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Voice Center Conference Phone Model CP-2012Table of Contents Voice Center User’s Manual Package Contents Safety PrecautionsQuick Start Guide IntroductionSetup Tips Analog or Digital Telephone System?Analog DigitalSetup with Analog Telephone System Analog Telephone SystemWall Mounting of Analog Interface Optional Selection of Tone or Pulse DialingKeypad Functions with Analog Phone System ON/OFFConference Phone Operation with Analog Phone System Three-way calling Setup of Conference Phone with Digital Phone System Digital Telephone SystemDigital Systems Wall Mounting of Digital Interface OptionalKeypad Functions with Digital Phone System Standard 12-button Telephone Keypad, REDIAL, FlashConference Phone Operation with Digital Phone System General Setup Tips Setting up the Conference Phone Global RegionTips for Obtaining Optimal Acoustic Performance Eneral Specifications Conference PhoneSpracht Limited Warranty Policy USAPage Federal Communications Commission Statement Tel Fax Bayshore Parkway, Bldg Mountain View, CA 94043 USA
Top Page Image Contents