Spracht CP-2012 manual Specifications, Conference Phone

Specifications

Conference Phone

Controls and Interface

Switches	Microphone switch to turn on	Tone/pulse switch to select
	2, 3 or all 4 built-in microphones	telephone dialing mode
LED indication lights	Green LEDs (one by each active	4 red LEDs (one by each microphone)
	microphone) indicates unit is on	indicate mute is activated

Speakerphone connections	Inputs:
	RJ-45 for telephone interface cable
	2 RJ-22 jacks for external mics

Output:

1 RCA jack for connection to external recorder (not supplied)

Electrical specifications

Power	15 VDC; 120 VAC adapter supplied (input 120 VAC 60 Hz, output 900mA at 15 VDC)
Current draw	Standby: 110 ± 10 mA	Operation: 220 mA and above
Output of loudspeaker	5W at 81
Microphone sensitivity	4 internal microphones: -47 ± 4 dB
Mechanical specifications
Speakerphone (main body)	13.75 inch (350 mm) diameter	Comes with 20 ft (6 m) RJ-45 cable
	1 lb. 10 oz. (740 g)

Telephone System Interface

Connections		Inputs:	Outputs:
	Both analog and digital	15 VDC for power adapter	RJ-45 cable to conference phone
	Analog	RJ-11 for telephone line	RJ-11 for external telephone (neither
			cable nor telephone supplied)
	Digital	RJ-22 for telephone handset	RJ-22 cable connection to handset jack
Dimensions		4.6 in. wide x 1.6 in. tall x 1 in. deep (118 x 45 x 25 mm)
Weight		1.9 oz. (53 g)	May be mounted by telephone jack

Note: Data apply for both analog and digital telephone system interfaces unless otherwise noted.

External Microphone

Connection	Comes with 70 in. (1.8 m) cable with RJ-22 connector
Microphone sensitivity	-47 ±4 dB
Weight	2.4 oz. (69 g)

14