Nikon CM200 service manual Service Aids, Motorola Part Description Application

Service Aids 2-19

9.0Service Aids

Table 2-5 lists the service aids recommended for working on the radio. While all of these items are available from Motorola, most are standard workshop equipment items, and any equivalent item capable of the same performance may be substituted for the item listed.

Table 2-5Service Aids

Motorola Part	Description	Application
No.
RLN4460_	Portable Test Set	Enables connection to audio/accessory jack.
		Allows switching for radio testing.
HVN4191_	Customer Programming	Programs customer options and channel data.
	Software (CPS) - Software on
	CDROM & Global Tuner
RKN4081_	Programming Cable with	Includes radio interface box (RIB) capability.
	Internal RIB
FKN8096_	Data/Flash Adapter Key	Used with RKN4081 (10 to 8 pin adapter for
		front Telco connector with Data/Flash switch).
RKN4083_	Mobile Programming/Test Cable	Connects radio to RIB (RLN4008_).via rear
		accessory connector
FKN8113_	Adapter Cable	Used with RKN4083 (20 to 16 pin adapter for
		rear accessory connector).
GTF374_	Program Cable	Connects RIB to Radio microphone input.
RLN4008_	Radio Interface Box	Enables communications between radio and
		computer’s serial communications adapter.
HSN9412_	Wall-Mounted Power Suppy	Used to power the RIB. (120 V ac)
HLN8027_	Mini UHF to BNC Adaptor	Adapts radio antenna port to BNC cabling of
		test equipment.
8180384N64	Housing Eliminator (25W)	Test Fixture used to bench test the radio pcb.
3080369B71	Computer Interface Cable	Connects the RIB to the Computer (25-pin).
3080369B72	Computer Interface Cable	Connects the RIB to the Computer (9-pin)
		(Use for IBM PC AT - other IBM models use
		the B71 cable above).
6686119B01	Removal Tool	Assists in the removal of radio control head.
6680334F39	Hex Tool	Assists in the removal of antenna connector.