Troubleshooting
Problem
•Potential cause/mSolution
The pager is not on.
•Turn the pager on.
mPress the POWER/ESC button for more than two seconds.
•The battery is not installed correctly.
mCheck to see if the battery is correctly installed.
•Battery power is too low. mInsert a new battery.
The display disappears.
•If you do not operate the pager for more than a specified time the display returns to standby mode to conserve the batteries. This is not a sign of trouble.
The data you are entering is not saved.
•If the following occurs during information or memo input, the data cannot be saved.
–An alarm activates.
–“LOW BATTERY!” is displayed.
–An extended delay occurs during information or memo input causing the display to disappear.
44