Sony MP-7001 Inserting the battery, Then slide the battery lock down, To replace the battery

Page 13

Inserting the battery

Insert the supplied size AA alkaline battery.

1	Slide the battery lock up 1.2	1
	Slide the battery cover until
	the “•” mark on the cover
	aligns with the “•” mark on
	the pager body 2, then
	remove it.
2	Insert the battery “–”
3	(contact) side first.
3	Align the “•” mark on the
	cover with the “•” mark on

the body and push in the cover until a click is heard.

Then slide the battery lock down.

To replace the battery

Replace the battery when theicon and LOW BATTERY! messages appear on the display. Insert a new size AA alkaline battery within one minute after you remove the old one to retain the stored contents.

Cautions

•Turn off the pager when replacing a battery.

•Sony does not take responsibility for lost memory contents while replacing a battery.

•Insert a battery so the “+” and “–” on the battery line up with the “+” and “–” on the pager.

•If the LOW BATTERY! message appears on the display, messages will no longer be received after

approximately 24 hours.

13

Getting Started

Image 13

Contents Alphanumeric Pager Owner’s record Information Important Safety Precautions Getting Started Table of contents Memo Function SettingsFeatures Number of stored messages Before operating the pagerBattery cover 5Battery lock 6Speaker Display POWER/ESC buttonLooking at your pager PagerDisplay Upwards indicator AM/PM indicatorAudible alert indicator ¡ Vibration indicatorThen slide the battery lock down Inserting the batteryTo replace the battery About Backlighting Turning the power onTurn the Jog Dial, select Function MENU, then press Setting the time and dateTurn the Jog Dial, select SET Time & DATE, then press Turn the Jog Dial, set the month, then press Turning the power offTo stop the sound or vibration When the memory is fullTo read a message Page Turn the Jog Dial, select the desired item, then press Selecting a menuReading a message Press in the Jog Dial while in standby modeWhen there are no messages to read Press POWER/ESC after you have finished reading the messageTurn the Jog Dial, select the desir ed message, then press Reading the next message Locking and unlocking a message When Lock Full appearsUnlocking a message Turn the Jog Dial, select DELETE,then press Deleting messagesTurn the Jog Dial, select YES, then pr ess Select Delete ALL Deleting all messagesThen press the Jog DialMoving a message to a folder When Folder Memory Full appearsTurn the Jog Dial, select FOLDER, then press Turn the Jog Dial, select a folder , then pr essReading a message in a folder Managing the message foldersPress Turn the Jog Dial, select MOVE, then press Moving a message to another folderTurnYES.and press in the Jog Dial to select Deleting a message in a folderEntering a memo Select When Memo Memory Full appearsScreen Searching for a memoDeleting a memo Editing a memoTurn the Jog Dial, select Audible or VIBRATION, then press Setting alert notificationTurn the Jog Dial Select an item, then Setting the alarm clockTurn the Jog Dial, select the time desired, then press Turn and select , then press in the Jog Dial to save To cancel the alarmSelect Select Selecting an audible alert typeTurn the Jog Dial to select the alert type, then press Turning off the Do Not Disturb time Turn the Jog Dial to select the ending time, then pressChanging the banner Changing an inbox or folder name Changing the scroll mode Adjusting the contrast Viewing the product information Problem Potential cause/mSolution Pager is not on TroubleshootingPager is not receiving messages Specifications