Furuno ARP-17 manual Menu tree, Menu description

Menu tree

[MENU] key

1.VIDEO PLOT

2.TGT TRAIL

3.TGT ALARM

4.WATCH TIM (PANEL DIM shown on FR-1710/1725/1760DS.)

5.ECHO SIG

6.FUNC

7. PLOT	1. MARK DISP (OFF/ON)
8. MARK	2. ERASE
9. BRILL	3. VECT REF (REL/TRUE)
0. OTHER	4. VECT TIME (30S/1/3/6/15/30MIN)
	5. CPA SET (OFF/0.5/1/1.5/2/3/4/5/6NM)
	6. TCPA SET (30S/1/2/3/4/5/6/12/15MIN)
PLOT MENU 1	7. TRACK (ON/OFF)
	8. AUDIO ALARM (OFF/ON)
	9. INTVAL (30S/1/2/3/6MIN)
	0. ↓	1. −
		2. AUTO ACQ (OFF/ON/SET)
		3. GUARD ZONE (OFF/ON/SET)
	PLOT MENU 2	4. TRACK TEST
		5. LAND DISCRIM (0/1/2/3/4)
		6. TTM (OFF/REL/TRUE)
		7. VECT START (1MIN/20SCAN)
		8. REF TGT VECTOR (OFF/ON)
		9. TARGET BASED SPEED

Figure 2 Menu tree

Menu description

		Table 1 Menu description
	Menu Item		Function
PLOT MENU 1
1. MARK DISP			Turns target data display on/off.
2. ERASE			Erases all plot symbols.
3. VECT REF			Selects vector reference; true or relative.
4. VECT TIME			Sets vector time.
5. CPA SET			Sets CPA alarm range.
6. TCPA SET			Sets TCPA alarm range.
7. TRACK			Turns past position display on/off.
8. AUDIO ALARM			Turns audio alarm on/off.
9.	INTVAL		Selects past position display plotting interval.
0.	↓		Go to PLOT MENU 2.
PLOT MENU 2
1. −			Go to PLOT MENU 1.
2. AUTO ACQ			Sets an automatic acquisition area.
3. GUARD ZONE			Sets a guard zone.
4. TRACK TEST			Tests ATA processor for proper operation.
			Sets size of echo to be recognized as landmass. The
5. LAND DISCRIM			larger the figure the larger the landmass. Default setting
			is "2".
6. TTM			Turns target data output on/off.
7. VECT START			Start displaying a vector after 20 scans.
8. REF TGT VECTOR			Turns vector display on/off for reference target.
9. TARGET BASED SPEED			Selects reference target(s).

4