TOA Electronics EX-16 manual Exchange Specifications, Further Details

Page 4

2.1.2Specifications

The exchange is available with the following specifications.

EX-16 Capacity:

16 lines max. (with paging function)

Dimensions:

360(W) X 300(H) X 100(D)mm

 

(14.2" X 11.8" X 3.9")

Weight:

8.3 kg (18.3 lbs.) with 16 lines

Exchange capacity can be increased within the given limits in units of 4 lines.

Exchange Specifications

Ambient Temperature

Range:

32°~104° F (0°~40°C)

Audio Input Level:

+7dBm max.

Audio Output Level:

+30dBm max.

Bandwidth:

200Hz~10KHz

Crosstalk:

-60dB/1.5KHz

Subscriber Impedance: 600 ohms balanced (input/output)

Power Consumption: 30W

Power Source: AC 110, 120, 220, 240V ±10%

DC 24V

2.1.3Further Details

The exchange is composed of the following sections:

*CPU (Central Processing Unit)

*LAU (Line Amplifier Unit)

*DSM (Power Supply Module)

*Integral terminal board for connecting stations

The power supply module can be removed from the exchange case.

The exchange operates on AC/DC power.

The exchange is a compact, wall-mounted type. The connectors and

terminal for stations are on the mother board and completely assembled at

the factory.

2

Image 4
Contents TOA EX-16 Intercom System Features Specifications Further Details System Block Diagram Features ExchangeExchange Specifications SpecificationsFurther Details EX-16 Dimensions in mm Paging Receiving Switch Transmitting Circuit Control signal System Block Diagram Stations Accessories Station SpecificationsWall Mounting Panel YC-100 Talk-Back Unit TKU-11Power Source Precautions for Installation ExchangeStations Core Diameter Versus Transmission Distance Cable InstallationDistance as Functions of Core Diameter General Information WiringSpacing Piping ExampleConnection between the station and the exchange Clipping Tool C YC-105 Page AC/DC Power Supply Connection Connection of the Input/Output TerminalBGM Input Remote Control OutputAll-Call Paging Output Wiring Diagram Connection of the Talk-Back Unit Speaker Volume Adjustment Connection of the Speaker StationConnection with the Exchange 10.4 On/Off Control of BGMHow to Connect the Jumper Wire Jumper for Speaker Station Selection Jumper for BGM On/OffInspect Before Turning Power On Function SelectionTesting Adjusting Method PrecedurePage Trouble Shooting Guide Relationship Between Ambient Noise and Conversation ModeFault in Exchange Fault in Specific Station Only SymptomFault in Cable Line and R-Line are shorted or mixed up KOBE, Japan