Polycom IP 300 manual Troubleshooting, No Dial-Tone, No Display, Incorrect Display or Bad Contrast

Page 23

Troubleshooting

No Dial-Tone

Verify power is correctly applied to the SoundPoint® IP 300/301 SIP phone:

Check that the display is illuminated.

Make sure the LAN cable is inserted properly at the rear of the phone (try unplugging and re-inserting the cable).

If using in-line powering, check that the switch is supplying power to the phone (contact your system adminis- trator).

Verify if dial tone is present on any other audio paths:

Switch between handset, headset (if present) or hands-free to see if dial tone is present on these other paths.

If dial tone exists on one of these, connect a different handset or headset to isolate the problem.

No Display, Incorrect Display or Bad Contrast

Verify power is correctly applied to the SoundPoint® IP 300/301 SIP phone:

As “No Dial-Tone” above. Verify contrast adjustment:

Follow the instructions in this User Guide to adjust the contrast to a darker level.

Reboot the phone to obtain a default level of contrast (follow the instruc- tions in this User Guide).

No Ringing

Verify incoming ring setting and volume level:

Adjust the ringing level from the front panel using the volume up/ down keys.

Check that the Ring Type selected in the Settings menu is not the Silent Ring.

Verify successful outbound or inbound calling:

Place a call to the phone under investigation. Check that the display indicates incoming call information.

Lift the handset. Ensure dial tone is present and place a call to another extension or number. Check that the display changes in response.

Verify successful outbound or inbound calling:

• As “No Display” above.

20

Image 23
Contents User Guide Contents Part 15 Rules ModificationsPolycom SoundPoint IP 300/301 SIP Parts ListHandset & Handset Cord Network / Power Cable Power Adapter IntroductionPower over Ethernet PoE Option Installing SoundPoint IP 300/301 SIPConnecting Network and Power Source AC Power OptionAttaching the Base Connecting the Handset and Optional HeadsetFeatures Description Key DescriptionsUsing the Headset Using SoundPoint IP 300/301 SIPUsing the Handset Using Listen ModeMicrophone Mute Answering a CallCall Hold and Resume Multiple Calls on HoldSplitting a Conference General Key UseLocal Conferencing Ending a Call Call TimerTransferring a Call Call Forwarding Volume AdjustmentRedial Time and Date Headset Memory ModeDo Not Disturb See also Distinctive Ringing / Call Treatment Display ContrastRing Type Call ListsTo search for a particular contact Contact ListTo add or edit a contact Contact ListTo change a Speed Dial assignment Speed DialMultiple Lines Multiple Keys Per LineShared Lines Multiple Call AppearancesTures, Messages*,† Voice MailDistinctive Ringing / Call Treatment To listen to voice messagesTo read text messages Optional FeaturesPhone Reboot Text MessagingTact List Menu , select Features, ConPresence / Status / Buddy Lists To send a text messageTo add a contact in the buddy list To view and change Presence settingsSelect Features, Presence Buddy Status PresenceNo Ringing TroubleshootingNo Dial-Tone No Display, Incorrect Display or Bad ContrastDisplay shows Network Link is Down No Response from Feature Key PressesNo Audio on Headset Modifications Safety and ComplianceInstallation Instructions Class B Digital Device or PeripheralCE and Vcci Mark Polycom Limited Warranty and Limitation LiabilityIndustry Canada IC Limitations of Liability Warranty ExclusiveService Agreements ExclusionsCopyright Notice DisclaimerGoverning Law Page Polycom, Inc Barber Lane Milpitas, CA
Related manuals
Manual 29 pages 7.22 Kb Manual 28 pages 29.94 Kb