Polycom IP 300 manual Safety and Compliance, Class B Digital Device or Peripheral, Modifications

Page 24

Safety and Compliance

Part 15 Rules

This device is compliant with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interferences received, including interference that may cause unde- sired operation.

Class B Digital Device or Peripheral

Note: This equipment is tested and com- plies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.Reorient or relocate the receiving antenna.

2.Increase the separation between the equipment and receiver.

3.Connect the equipment into an outlet on a circuit different from that to which the receiver is con- nected.

4.Consult the dealer or an experi- ence radio/TV technician for help.

Modifications

In accordance with Part 15 of the FCC Rules, the user is cautioned that any chang- es or modifications not expressly approved

by Polycom, Inc. could void the user’s authority to operate the equipment.

Installation Instructions

Installation must be performed in accor- dance with all relevant national wiring rules.

L’Installation doit être exécutée confor- mément à tous les règlements nationaux applicable au filage électrique.

Plugs Acts as Disconnect Device

The socket outlet to which this apparatus is connected must be installed near the equip- ment and must always be readily accessible.

La prise électrique à laquelle l’appareil est branché doit être installée près de l’équipement et doit toujours être facile- ment accessible.

21

Image 24
Contents User Guide Contents Modifications Part 15 RulesParts List IntroductionInstalling SoundPoint IP 300/301 SIP Connecting Network and Power SourceAC Power Option In-Line Power OptionConnecting the Handset and Optional Headset Attaching the BaseFeatures Key Descriptions DescriptionUsing SoundPoint IP 300/301 SIP Using the HandsetUsing Listen Mode Using the HeadsetAnswering a Call Call Hold and ResumeMultiple Calls on Hold Microphone MuteGeneral Key Use Local ConferencingSplitting a Conference Transferring a CallCall Timer Volume AdjustmentEnding a Call RedialHeadset Memory Mode Do Not DisturbTime and Date Display Contrast Ring TypeCall Lists See also Distinctive Ringing / Call TreatmentContact List To add or edit a contactContact List To search for a particular contactSpeed Dial Multiple LinesMultiple Keys Per Line EditMultiple Call Appearances Shared LinesVoice Mail Distinctive Ringing / Call TreatmentTo listen to voice messages Tures, Messages*,†Optional Features Phone RebootText Messaging To read text messagesTo view and change Presence settings Presence / Status / Buddy ListsTo send a text message Page Troubleshooting No Dial-ToneNo Display, Incorrect Display or Bad Contrast No RingingNo Response from Feature Key Presses No Audio on HeadsetDisplay shows Network Link is Down Safety and Compliance Installation InstructionsClass B Digital Device or Peripheral ModificationsPolycom Limited Warranty and Limitation Liability Industry Canada ICCE and Vcci Mark Warranty Exclusive Service AgreementsExclusions Limitations of LiabilityDisclaimer Governing LawCopyright Notice Page Polycom, Inc Barber Lane Milpitas, CA
Related manuals
Manual 30 pages 2.83 Kb Manual 28 pages 29.94 Kb