Polycom Using SoundPoint IP 300/301 SIP, Placing a Call, Using the Handset, Using Listen Mode

Using SoundPoint® IP 300/301 SIP

Placing a Call

Using the Handset:

1.To obtain dial tone, pick up the handset.

2.Dial the desired number,

OR

Dial by SIP URL or IP† address:

•After obtaining dial tone press Name

•Enter URL or IP (press * for “.” and # for “@”)

•Press Send to complete the call.

Using Listen Mode:

During a call, users can alternate between handset or headset modes

by pressing the key, or picking up the handset.

1. With the handset on-hook, press Menu , and choose Features, fol-

lowed by Listen Mode.

2.Dial the desired number,

OR

Dial by SIP URL or IP† address as above.

Using the Headset:

1. With the optional headset connected,

press a line key, , or NewCall to obtain dial tone.

2.Dial the desired number,

OR

Dial by SIP URL or IP† address as above.

Listen Mode can be used for listening to a conference call but not actively participating, or for checking voice mail.

See also Headset Memory Mode.

Users also have the option to dial directly from the dial pad without first getting dial tone. Simply enter the number then lift the handset or press the Dial soft key or press thekey.

In all cases, the active call will appear on the display showing call duration and destination.

†Examples: 10.3.0.42	To obtain the IP address of your phone, press
joe@205.173.1.24	Menu followed by Status, Platform and
sip: jane@polycom.com	Phone. The IP address is listed together with
	other network information.

6