Getting Started with Your SpectraLink 8020/8030 Wireless Telephone
Take care not to short the battery contacts on the Battery Pack with metal objects such as coins, keys or paper clips. Shorting the contacts can cause permanent damage.
Battery Pack removal and replacement
To remove, press down on the latch on the Battery Pack on the back of the handset. The Battery Pack releases outward.
To replace, slide the lip of the Battery Pack into the bottom of the cavity. Push the top of the Battery Pack until it snaps into place. You should not have to force it against the handset.
Notes on Battery Packs
•Battery Pack life will vary depending on handset model and features and system infrastructure.
•Maximum Battery Pack performance is achieved after a few charge/discharge cycles.
•If multiple Battery Packs are supplied with your handset, Polycom recommends that each be fully charged upon receipt to prolong battery life. Battery Packs will slowly lose charge if unused. To maintain battery potential, charge unused Battery Packs occasion- ally or alternate Battery Pack use.
•After a length of time Battery Packs will lose the ability to maintain a charge and to perform at maximum capacity and will need to be replaced. This is normal for all batteries.
•If your Battery Pack requires replacement, contact your system administrator.
•Overnight charging is best done while the handset is turned off.
•The handset will chirp once when properly seated in the charger to let you know that the charging cycle has begun. If the handset does not charge, clean Battery Pack, charger and handset contacts with an alcohol swab.
Only use SpectraLink Battery Packs with SpectraLink 8020/8030 Wireless Telephones.
11 |