Polycom 1725-36203-001 manual Receive a PTT Call while on a Telephone Call, Use PTT Vibrate

Page 47

Using the Push-to-talk Features of Your SpectraLink 8030 Wireless Telephone

Receive a PTT Call while on a Telephone Call

Press the END key to end the telephone call. Now you can hear the

PTT call.

Use PTT Vibrate

To enhance the alerting of a PTT call, PTT Vibrate may be enabled on the Config menu.

When PTT Vibrate is enabled, the handset will vibrate three times whenever a PTT broadcast is received, whether the handset is in standby or in a call. If in a call, the chirp alert will also sound. The vibration does not replace any PTT tone volume already set. To set the handset for PTT vibrate only, enable PTT Vibrate and set the tone volume to zero.

PTT Vibrate is disabled by default.

Transmit on the Priority Channel

Press and release the TALK button. Select the priority channel from the list. Press and hold TALK, then speak. The priority channel takes priority over all other calls in progress.

End a PTT Call

Press the END key to exit the PTT call.

Change the PTT Volume

Press the up/down volume buttons on the side of the handset while transmitting or receiving a PTT call.

Answer a Telephone Call during a PTT Transmission

Press the START key. PTT transmissions will be pre-empted by the telephone call.

1725-36203-001-F.doc

47

Image 47
Contents User Guide Patent Information Polycom Model Numbers About this GuideIcons and Conventions Related DocumentsCustomer Support Contents User Profiles End One PTT Call and Start another on a Different Charger Options Cleaning and Drying the Handset Safety Information IndexOverview Indications of low battery Battery PacksBattery Pack removal and replacement Features of your SpectraLink 8020/8030 Wireless Telephone Line -Press to access additional line appearances Status Icons Handset DisplayLocked SoftkeysMenus Config menuNavOK Functions FCN menu Line menuHandset Modes Standby mode on-hookActive mode off-hook Push-to-talk PTT modeMessage alert mode Configuration menu modeCarrying Options AccessoriesHeadsets Config Menu Customizing your SpectraLink 8030/8030 Wireless TelephoneSilent Vibrate Cadence Off „„„„„„„ Setting/profile Silent Vibrate Soft Loud Custom Default settingsSet as Active Lock KeysUser Profiles Toggle optionsTelephone Ring Ring SettingsKey Tones Noise ModeRing in Headset/Speaker Phone Settings Push-to-Talk PTT Default ChannelPTT Audio Volume PTT Tone VolumeGateway IP Address System InfoPTT Vibrate Phone IP AddressEmergency Dial Page 1725-36203-001-F.doc Unlock the Keypad Turn the Handset OnTurn the Handset Off Lock the KeypadPlace a Call on Hold/Resume Call Answer or Reject a CallSilence the Ringing Answer a Second CallClear Forwarding on a Line Redial the Last Number you DialedAdjust the Speaker Volume Change the Ring VolumeEnd a Call Adjust the Headset VolumeOpen the Config Menu Mute/Unmute a CallPlace a Second Call Use the Phonebook and Speed Dial Activate Installed Custom ApplicationsPlace a Call on a Different Line Listen to VoicemailView a phonebook entry Search for a phonebook entryDelete a phonebook entry Edit a phonebook entryDial phonebook number Enter a new name and number in the phonebookAssign a speed dial number Make a speed dial callSpkr Spdl 1725-36203-001-F.doc Select a Different PTT Channel Make a PTT CallRespond to a PTT Call End a Wait PeriodTransmit on the Priority Channel Change the PTT VolumeReceive a PTT Call while on a Telephone Call Use PTT VibrateSubscribe to additional PTT channels Start a Telephone Call during a PTT TransmissionTurn off PTT Charger Models Install the ChargerAscending song Charging… Charging Status IndicatorsSingle Charger Dual Charger Quad Charger Page Cleaning and Drying the Handset User Guide SpectraLink 8020/8030 Wireless Telephone with SRP Cleaning and Drying the Handset Page Chargers and Battery Packs Safety InformationPotentially explosive atmospheres Wireless TelephonesHearing aids FacilitiesPacemakers For vehicles equipped with an airbag Other medical devicesSpecific Absorption Rate SAR Information EU SAR peak values in W/kg Handset operation normal positionIndex