Polycom 1725-36203-001 manual System Info, PTT Vibrate, Phone IP Address, Gateway IP Address

Page 30

User Guide: SpectraLink 8020/8030 Wireless Telephone with SRP

PTT Vibrate

To enhance the alerting of a PTT call, PTT Vibrate may be enabled. When PTT Vibrate is enabled, the handset will vibrate three times whenever a PTT broadcast is received, whether the handset is in standby or in a call. If in a call, the chirp alert will also sound. The vibration does not replace any PTT tone volume already set.

To set the handset for PTT vibrate only, enable PTT Vibrate and set the tone volume to zero.

System Info

Displays the IP address of the highlighted menu item. The IP address appears in the upper portion of the screen below the words System Info.

Phone IP Address

Displays the IP address currently assigned to the handset by the SVP

Server.

Gateway IP Address

Displays the IP address used by the SpectraLink Telephony Gateway which operates as a call administrator between the handset and the PBX.

Firmware Version

Displays the software version running the handset. The MAC address is the hardware identification number and is set at the factory. Three code numbers correspond to the three software files that each software version uses.

30	1725-36203-001-F.doc

Image 30

Contents User Guide Patent Information About this Guide Polycom Model NumbersRelated Documents Customer SupportIcons and Conventions Contents User Profiles End One PTT Call and Start another on a Different Cleaning and Drying the Handset Safety Information Index Charger OptionsOverview Battery Packs Indications of low batteryBattery Pack removal and replacement Features of your SpectraLink 8020/8030 Wireless Telephone Line -Press to access additional line appearances Handset Display Status IconsSoftkeys LockedConfig menu NavOK FunctionsMenus Line menu FCN menuPush-to-talk PTT mode Standby mode on-hookActive mode off-hook Handset ModesConfiguration menu mode Message alert modeAccessories HeadsetsCarrying Options Customizing your SpectraLink 8030/8030 Wireless Telephone Config MenuSilent Vibrate Cadence Off „„„„„„„ Default settings Setting/profile Silent Vibrate Soft Loud CustomToggle options Lock KeysUser Profiles Set as ActiveRing Settings Telephone RingNoise Mode Ring in Headset/SpeakerKey Tones Phone Settings PTT Tone Volume Default ChannelPTT Audio Volume Push-to-Talk PTTPhone IP Address System InfoPTT Vibrate Gateway IP AddressEmergency Dial Page 1725-36203-001-F.doc Lock the Keypad Turn the Handset OnTurn the Handset Off Unlock the KeypadAnswer or Reject a Call Place a Call on Hold/Resume CallRedial the Last Number you Dialed Answer a Second CallClear Forwarding on a Line Silence the RingingChange the Ring Volume Adjust the Speaker VolumeMute/Unmute a Call Adjust the Headset VolumeOpen the Config Menu End a CallPlace a Second Call Listen to Voicemail Activate Installed Custom ApplicationsPlace a Call on a Different Line Use the Phonebook and Speed DialSearch for a phonebook entry View a phonebook entryEnter a new name and number in the phonebook Edit a phonebook entryDial phonebook number Delete a phonebook entryMake a speed dial call Assign a speed dial numberSpkr Spdl 1725-36203-001-F.doc End a Wait Period Make a PTT CallRespond to a PTT Call Select a Different PTT ChannelUse PTT Vibrate Change the PTT VolumeReceive a PTT Call while on a Telephone Call Transmit on the Priority ChannelStart a Telephone Call during a PTT Transmission Turn off PTTSubscribe to additional PTT channels Install the Charger Charger ModelsCharging Status Indicators Ascending song Charging…Single Charger Dual Charger Quad Charger Page Cleaning and Drying the Handset User Guide SpectraLink 8020/8030 Wireless Telephone with SRP Cleaning and Drying the Handset Page Safety Information Chargers and Battery PacksWireless Telephones Potentially explosive atmospheresFacilities PacemakersHearing aids Other medical devices For vehicles equipped with an airbagSpecific Absorption Rate SAR Information Handset operation normal position EU SAR peak values in W/kgIndex