Polycom 14158600-HD manual Battery Capacity

Page 11

Polycom Kirk 5020-5040 User Guide

Getting Started

 

 

 

 

áPlace handset in charger.

For correct charging, be sure the room temperature is between 0°C/32°F and 40°C/104°F. Do not place the handset in direct sunlight. The battery has a built-in heat sensor which will stop charging if the battery temperature is too high.

If the handset is turned off when placed in charger, nothing indicates the charging. There will be no reaction on incoming calls.

If the handset is turned on when charging, the display shows the blue charging icon in the status bar. The charging icon is replaced by the green fully charged icon , when the battery is fully charged (when handset is removed from charger, the charging icon disappears). The handset will not vibrate. Auto answer is inactive. The handset reacts normally for incoming calls.

It is necessary to recharge battery when display shows the battery low icon , or if the handset cannot be turned on.

Battery Capacity

The capacity of the battery depends on the use of backlight and talk time.

Battery capacity in active mode:

•5020: up to 20 hours of talk time. 5040: up to 15 hours of talk time. Battery capacity in standby mode:

•5020: 200 hours when display backlight is turned off. 5040: 100 hours when display backlight is turned off.

•5020: 100 hours when display backlight is set at dimmed. 5040: 60 hours when display backlight is set at dimmed.

For information about how to check battery capacity, refer to “Battery” on page 53.

Polycom, Inc.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Polycom Kirk 5020-5040 User Guide USA Contents Messages SettingsPhone Book Call RegisterGeneral Information Polycom Kirk 5020-5040 User Guide Handset Information Getting StartedLocation Type Part Number Battery InformationCharger Information Installing Battery Removing the Battery Protection StripCharging Battery Battery Capacity Battery Disposal About Your 5020 / 5040 Handset Right Softkey Left Softkey On hook idleOff hook active Handset Display Status Icons 4Handset Icons Display Backlight Navigating HandsetNavigating Cursor Entering Main MenuScrolling in Menus Confirming ChoicesLeaving Menus Adjusting VolumesShortcuts Returning to Previous MenuTo remove a shortcut To use a shortcutLocking Keypad Adjusting Speaker VolumeBasic Handset Options Turning Handset On/OffTo lock/unlock keypad Dial from Phone Book Making CallsOff Hook Dialling Dial Directly On Hook Dialling Pre-DialTo dial from call register Dial from Call ListDial from Call Register To dial from call listSpeed Dial RedialReject a Call Answering CallsAuto Answer Mute a CallTo view, reply and listen to your messages Replying to messagesTo turn loadspeaker on/off During CallsTurning Loadspeaker On/Off Entering Phone BookDescription of Menus Using the MenuList of Menu Functions External ServicesMSF Function Polycom Kirk 5020-5040 User Guide Finding Contact in Phone Book Using the Alphanumeric KeyboardPhone Book Managing an Existing ContactAdding New Number Dialing Contact from Phone BookEditing Name/Number Scroll to Edit name/number and press SelectDeleting Number Press DetailsAdding to Speed Dial Scroll to Add to speed dial and press SelectScroll to Delete name/number and press Select Deleting Speed DialScroll to Speed dial number and press Select Deleting ContactScroll to Add name/number and press Select Adding New ContactAdding an Incoming Call to Phone Book Call RegisterIncoming Calls Viewing List of Incoming CallsPress Options and scroll to Delete from list Outgoing CallsScroll to Add to phone book and press Select Viewing List of Missed Calls Missed CallsPress Options Scroll to Add to phone book and press Select Deleting an Outgoing Call from ListDeleting All Outgoing Calls DeleteDeleting a Missed Call from List Deleting All Incoming CallsDeleting All Calls from All Lists Deleting All Missed CallsWriting and Sending a New Message MessagesSaving a New Message as a Template Clearing Text FieldSaving a New Message in Outbox Press Options Sending Messages Using TemplatesSaving a Received Message as a Template To use a template in a messageTo read the long message Reading a MessageReading a Long Message Press SelectReplying a Message Reading a Short MessageReading a Call Back Message Forwarding a Message Reply Using a TemplateReply in Continuation of Original Text Erasing a Single Template Resending a MessageErase All Messages from Outbox Erasing a Single MessageErase All Read Messages from Inbox Erase All Messages from InboxErase All Messages Auto Answer StatusSilent HeadsetRinging Tone BatteryVolume To check remaining battery capacityTo choose a new ring tone SettingsRinging Volume To adjust the volume of the ring toneVibrator Alerting VolumeTo adjust alerting volume Scroll to Alerting volume and press SelectTo change settings of silent mode Silent ModeChanging Settings of Silent Mode To turn silent mode on/offTo turn auto key lock on/off Setting Backlight at DimmedAdjusting Backlight Delay BacklightTo change settings of auto answer Changing Settings of Auto AnswerTo turn out of range on/off Changing Settings of Out of RangeTo change the settings Out of RangeDeactivate Bluetooth Bluetooth only KirkActivate Bluetooth Function Pair Wireless Headset with the HandsetRemove Wireless Headset from the Device List Activate Bluetooth AgainDisconnect Wirelees Headset Connect Wireless Headset againAuto Connect Wireless Headset VolumeSwitch Between Wireless Headset and Handset Any Key Answer AdvancedLast Number Redial LanguageScroll to Alert on or Alert off and press Change LoginScroll to Headset Volume and press Change Long KeyCreating a Login Removing a LoginSet Time Selecting Login AutomaticallyTime & Date Choose Time FormatSet Date Choose Date FormatGeneral Information TroubleshootingError information Handset cannot find a system ID at Create LoginTemperature and air pressure Technical SpecificationImportant Safety Instructions and Product Information Size and weightExposure to sunlight, heat and moisture Intrinsic safetyPolycom Kirk 5020-5040 User Guide General Information International Regulatory and Product Information Kirk 5020 / 5040 handset Συμμορφωνεται Προσ ΤΙΣ Buurt van onbeschermde ontstekers of in een Gebruik dit draadloos netwerkapparaat alleen in deNon utilizzare la periferica di rete senza fili Important Safety InstructionsIntrinsic safety Battery Precautions Polycom Kirk 5020-5040 User Guide Information Polycom Product Warranty Statement Polycom Kirk 5020-5040 User Guide Information END-USER License Agreement for Polycom Software Grant of License Support Services Warranty and Warranty Exclusions Disclaimer Polycom Kirk 5020-5040 User Guide Information Polycom Headquarters

14158600-HD specifications

The Polycom 14158600-HD is a cutting-edge communication device designed for high-definition video conferencing. As part of the Polycom line of products, it exemplifies the brand’s commitment to quality and innovation in remote collaboration technology.

This model integrates a range of advanced features that facilitate seamless communication and enhance the user experience. One of its standout characteristics is the high-definition video and audio quality it delivers. With support for 1080p video resolution, the Polycom 14158600-HD ensures that participants experience clear and detailed visuals during meetings. This capability is critical for effective communication, especially in professional settings where visual cues are essential.

Additionally, the device incorporates Polycom's renowned Acoustic Clarity Technology, which provides exceptional audio clarity. This technology reduces background noise and ensures that voices are transmitted with remarkable clarity. This feature is particularly beneficial in minimizing distractions during meetings, allowing participants to focus on the discussion instead of struggling to hear or understand each other.

The Polycom 14158600-HD also supports various video standards and protocols, ensuring broad compatibility with different video conferencing systems. This versatility is an important consideration for organizations that use multiple communication platforms, as it allows for easy integration into existing infrastructures.

Another key aspect of the device is its ease of use. With an intuitive interface and straightforward setup processes, even those with minimal technical expertise can navigate the system effectively. The streamlined design ensures that users can initiate and manage video calls with minimal hassle, promoting a productive meeting environment.

In terms of connectivity, the Polycom 14158600-HD is equipped with numerous ports, including HDMI and USB options, which provide flexibility in connecting various peripherals and display devices. This versatility is essential for enhanced collaborations and presentations during meetings.

Lastly, the device has a sleek, contemporary design that fits well in any office environment. This aesthetic appeal is complemented by robust construction, ensuring that the device is not only efficient but also durable.

In summary, the Polycom 14158600-HD stands out as a premium choice for organizations seeking to enhance their video conferencing capabilities. Its high-definition quality, superior audio technology, compatibility with various systems, user-friendly interface, connectivity options, and stylish design all contribute to a powerful communication tool that can significantly improve remote collaboration.
Top Page Image Contents