Polycom Using SoundPoint IP 430 SIP, Placing a Call, Using the Handset, Using the Headset

Using SoundPoint® IP 430 SIP

Placing a Call

Using the Handset:

1.To obtain dial tone, pick up the handset.

2.Dial the desired number.

OR

Dial by SIP URL/IP address†:

•After obtaining dial tone, press Name

•Enter URL or IP (press * for “.” and # or “@”)

•Press Send to complete the call.

Using Hands-Free Speakerphone Mode:

1. With the handset on-hook, press any as- signed line key, , or NewCall to obtain dial tone.

2.Dial the desired number.

OR

Dial by SIP URL or IP address† as above.

Using the Headset:

1. With the optional headset connected, press

any assigned line key, , or NewCall to obtain dial tone.

2.Dial the desired number.

OR

Dial by SIP URL or IP address† as above.

Users also have the option to dial directly from the dial pad without first getting dial tone. Sim- ply enter the number then lift the handset, press

the Dial soft key, or press theorkeys.

In all cases, the active call will appear on the display showing call duration and destination.

During a call, users can alternate between handset, headset, or hands-free modes by pressing the or keys, or picking up the handset.

See also Headset Memory Mode.

†Examples: 10.3.0.42	To obtain the IP address of your phone, press
joe@205.173.1.24	Menu followed by Status, Platform and
sip: jane@polycom.com	Phone. The IP address is listed together with
	other phone information.

7