Polycom IP 430 manual Safety and Compliance, Part 15 Rules, Class B Digital Device or Peripheral

Page 26

No Response from Feature Key Presses

Verify phone is in active state:

•Make a call to the phone to check for inbound call display and ring- ing as normal. If successful, try to press feature keys within the call to access Directory or Buddy Status for example.

Display shows “Network Link is Down”

Verify LAN cable is properly connected:

•Check termination at the switch or hub (furthest end of the cable from the phone).

•Check that the switch or hub is opera- tional (flashing link/status lights) or contact your System Administrator.

• Press Menu followed by Status, Network and Ethernet. Scroll down to verify LAN port is Active.

•Reboot the phone to attempt recon- nection to the network.

Safety and Compliance

Part 15 Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interfer- ences received, including interference that may cause undesired operation.

Class B Digital Device or Peripheral

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm- ful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.Reorient or relocate the receiving antenna.

2.Increase the separation between the equipment and receiver.

3.Connect the equipment into an out- let on a circuit different from that to which the receiver is connected.

4.Consult the dealer or an experience radio/TV technician for help.

23

Page 25 Page 27
Image 26
Page 25 Page 27
Contents DEF 6 MNO 9 Wxyz # Sel Menu Voice Mail DoNotDisturbContents Multilingual Support Localization Phone Reboot Optional FeaturesTroubleshooting Safety and Compliance Text Messaging Presence / Status / Buddy ListsParts List IntroductionAC Power Option Installing SoundPoint IP 430 SIPConnecting Network and Power Source In-Line Power OptionDeskmount Method Connecting the Handset and Optional HeadsetAttaching the Base Wallmount Method Features Feature Key Description Key DescriptionsUsing Hands-Free Speakerphone Mode Using SoundPoint IP 430 SIPUsing the Handset Using the HeadsetMultiple Calls on Hold Answering a CallCall Hold and Resume Microphone MuteSplitting a Conference General Key UseLocal Conferencing Ending a Call Call TimerTransferring a Call RedialDo Not Disturb Volume AdjustmentCall Forwarding Deselect Do Not DisturbDisplay Contrast Headset Memory ModeTime and Date Lowed by Basic, ContrastContact Directory Ring TypeCall Lists Ring TypeContact Directory Speed DialTo add or edit a contact To search for a particular contactMultiple Lines Multiple Keys Per LineMultiple Call Appearances Shared Lines To listen to voice messagesTo set a distinctive ring for a local contact Distinctive Ringing / Call TreatmentMultilingual Support Localization Select Contact DirectoryText Messaging Optional FeaturesPhone Reboot To read text messagesSelect Instant Messages Presence / Status / Buddy ListsTo send a text message To view and change Presence settings PresenceNo Display, Incorrect Display, or Bad Contrast TroubleshootingNo Dial-Tone No RingingPart 15 Rules Safety and ComplianceNo Response from Feature Key Presses Class B Digital Device or PeripheralPolycom Limited Warranty and Limitation Liability Exclusions Warranty ExclusiveService Agreements Governing Law Limitations of LiabilityDisclaimer Copyright NoticePage Polycom, Inc Barber Lane Milpitas, CA
Related manuals
Manual 2 pages 11.25 Kb

IP 430 specifications

The Polycom IP 430 is a sophisticated VoIP phone designed to cater to the needs of business professionals seeking reliable and efficient communication tools. This device is particularly well-suited for environments such as small to medium-sized businesses, offering an array of features that enhance productivity and connectivity.

One of the main features of the Polycom IP 430 is its user-friendly interface. The phone comes equipped with a 320x160 pixel graphical LCD display, which provides clear visibility for incoming calls, contacts, and other essential phone functions. The keypad layout is intuitive, allowing users to navigate menus and settings without hassle.

Audio quality is critical in a VoIP phone, and the Polycom IP 430 excels in this area thanks to its Polycom HD Voice technology. This feature ensures that conversations are crystal clear, offering rich, natural sound quality for both parties on the call. It utilizes wideband audio and advanced noise reduction techniques, creating an optimal acoustic experience that minimizes disruptions and enhances communication clarity.

Connectivity is another strong point of the Polycom IP 430. It supports Power over Ethernet (PoE), which simplifies installation by allowing the phone to receive power through the Ethernet cable, reducing the need for extra power outlets. The device also features multiple line appearances, allowing users to manage several calls simultaneously, which is especially useful in busy office environments.

The Polycom IP 430 is designed to support various VoIP protocols, including SIP (Session Initiation Protocol), ensuring compatibility with a range of VoIP systems and services. This adaptability makes it a versatile choice for businesses looking to integrate new communication technologies without significant overhauls.

Additional characteristics include programmable function keys that enhance workflow efficiency, a built-in web server for easy configuration, and support for various headset connections for hands-free communication.

In summary, the Polycom IP 430 combines robust features, superior audio quality, and strong connectivity options, making it an excellent choice for businesses aiming to improve their communication capabilities. With its reliable performance and user-friendly design, it stands out as a valuable asset in any professional setting.
Top Page Image Contents