RCA 25413, 14 manual Intercom Auto Answer, Flash Time, Call Alert Tone

Page 10

Connections & Setup

Intercom Auto Answer

For “hands-free” operation, the phone can be set to automatically answer an intercom call using the speaker.

TIP: You may also use this feature for room monitoring.

1.Press the MENU button while in standby mode.

2.Use the < REVIEW > button to scroll to SET PHONE OPTIONS.

3.Press the SELECT/SAVE button.

4.Use the < REVIEW > button to scroll to INTERCOM AUTO ANS.

5.Press the SELECT/SAVE button.

6.Use the < REVIEW > button to choose YES or NO.

7.Press the SELECT/SAVE button to save.

Flash Time

1.Press the MENU button while in standby mode.

2.Use the < REVIEW > button to scroll to SET PHONE OPTIONS.

3.Press the SELECT/SAVE button.

4.Use the < REVIEW > button to scroll to SET FLASH TIME.

5.Press the SELECT/SAVE button.

6.Use the < REVIEW > button to scroll through the flash time options. You may choose 100ms or 600ms.

7.Press the SELECT/SAVE button to save.

NOTE: You may press the EXIT button at any time to exit.

Call Alert Tone

Turn ON the Call Alert to hear a tone for incoming calls while you are in conversation. This function notifies you that there is a incoming call while you are using the phone. If you do not want this tone to disturb your conversation, you can set it to OFF.

1.Press the MENU button while in standby mode.

2.Use the < REVIEW > button to scroll to SET PHONE OPTIONS.

3.Press the SELECT/SAVE button.

4.Use the < REVIEW > button to scroll to CALL ALERT TONE.

5.Press the SELECT/SAVE button.

6.Use the < REVIEW > button to scroll to ON or OFF.

7.Press the SELECT/SAVE button to save. The cursor automatically moves to LINE 2.

8.Repeat steps 6 and 7 for each telephone line. After you select a tone for Line 4, press the EXIT button.

No Unknown/Blocked (Not applicable to model 25413)

This option allows you to decide whether the unknown or blocked caller ID calls are saved or not. If you select YES, the unknown or blocked calls will be saved.

1.Press the MENU button while in standby mode.

2.Use the < REVIEW > button to scroll to SET PHONE OPTIONS.

3.Press the SELECT/SAVE button.

4.Use the < REVIEW > button to scroll to NO UNKNOWN/BLOCKED.

5.Press the SELECT/SAVE button.

6.Use the < REVIEW > button to scroll to YES or NO. The default is YES.

7.Press the SELECT/SAVE button to save.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model 25413/14 Interference Information Important InformationEquipment Approval Information Notification to the Local Telephone CompanyLicensing FCC RF Radiation Exposure StatementHearing Aid Compatibility Table of Contents Telephone Jack Requirements Connections & SetupParts Checklist Base LayoutImportant Installation Guidelines Important Installation InformationInstalling the Phone Line 1 + Line 3 + Other System Phones Data PortSystem Verification Programming the TelephonePhone ID Delay RingPriority Line Phone NameCall Alert Tone Intercom Auto AnswerFlash Time No Unknown/Blocked Not applicable to modelLocal Area Code Not applicable to model Manually Setting the Time and DateDisplay Contrast Regional Area Codes Not applicable to modelOperation Basic OperationPre-dialing Switching Between the Speakerphone, Handset, and HeadsetMaking Calls with the Optional Headset Answering CallsRedial HoldFlash Reviewing the Redial NumbersPrivacy VolumeIntercom Calls Conference CallsCaller ID CID If You Did Not Program Your Local Area Code Caller IDIf You Programmed Your Local Area Code Receiving and Storing CID RecordsCall Waiting Caller ID MemoryMemory Log and Phone Book Directory Memory Dialing a Stored Number Storing the Last Number DialedStoring a Pause in Memory Memory Delete/ClearOther Information Service General Product CareLimited Warranty For how long after your purchaseAccessory Information Accessory InformationIndex
Top Page Image Contents