NuTone nc300 Display Brightness, Intercom Selector Switch Settings, Radio and Intercom, Off

Page 4

models nm200 • nc300

Note: When music is off, use VOLUME UP and VOLUME DOWN to adjust Master Volume.

3.Press TONE. The Loudness function appears. Press VOLUME UP to turn Loudness on. Press VOLUME DOWN to turn Loudness off.

4.Press TONE. The Treble function appears. Use VOLUME UP and VOLUME DOWN to adjust the treble from 0-14.

5.Press TONE. The Bass function appears. Use VOLUME UP and VOLUME DOWN to adjust the bass from 0-14.

6.Press TONE. Intercom Volume appears. Use VOLUME UP and VOLUME DOWN to adjust the Intercom Volume from 0-29.

Note: When music is off, press TONE to access Intercom Volume, then use VOLUME UP or VOLUME DOWN to adjust Intercom Volume.

Display Brightness

1.Simultaneously press TUNE UP and POWER. The display cycles through brightness levels: low, medium, and high, then repeats the cycle.

2.Press the buttons repeatedly until you reach the brightness you prefer.

Intercom Selector Switch Settings

You can set all major Intercom functions using the Intercom selector switches on the Master Station.

You can set each station to one of four configurations:

Intercom Only

Radio/INT (Music source and Intercom)

Off

Monitor

Note: When the system has more than 9 Remote Stations some intercom selector switches will control two remote stations.

Page 

Intercom

When a station is set to Intercom (Intercom only):

You can talk and listen from this station.

The room does not receive music.

The room cannot be monitored.

The room cannot hear other rooms that are set to Monitor.

Note: When a station is set to Intercom, the sound and activity in that room can be heard by another remote station by pressing the LISTEN button.

The station hears the door chime and users can talk and listen to the Door Station.

Radio and Intercom

When a station is set to Radio/INT (Music source and Intercom):

You can talk and listen from this station.

The room can receive music.

The station can monitor any other station that is set to Monitor.

Note: When music is on, the audio from a monitored room is heard in addition to the music.

The station itself cannot be monitored.

Note: When a station is set to Radio/INT, the sound and activity in that room can be heard by another remote station by pressing the LISTEN button.

The station hears the door chime and communicate with and listen to a Door Station.

Off

When a station is set to OFF:

You can communicate from an Indoor Remote Station but you cannot communicate from an Outdoor Remote Station.

Image 4
Contents Master Station System overviewIndoor/Outdoor Remote Stations System settings Preset Radio Stations Scan ModeAudio Settings Volume ToneIntercom Selector Switch Settings Display BrightnessIntercom Radio and IntercomIntercom operation Adjust System Music Volume Turn Music Source On and OffDoor Station Functions CD Player Operation OptionalCD Functions Merchantability or Fitness for a Particular Purpose